Ram Radiator Ornament what year and model

[Mopar-Boy]

Can anyone tell me what year(s) and model(s) vehicle that this came from?  Thanks!

[Young Ed]

Not sure but it might look good on my neighbors 29 dodge rod

[Doug&Deb]

I believe Dodge started using the ram ornament in 33 or34 and that appears to be from that era.

[knuckleharley]

I am not certain since that is the one part missing from my all-original 33 Dodge 4dr,but I am guessing it would be a perfect fit;

[knuckleharley]

Just now, knuckleharley said:

I am not certain since that is the one part missing from my all-original 33 Dodge 4dr,but I am guessing it would be a perfect fit.

How much do you want for it?

Edited October 25, 2020 by knuckleharley

[Andydodge]

I have an original 1934 Dodge radiator cap/mascot that was on the 34 Dodge that my grandfather had in the 1940's.....he replaced it as the area holding the actual cap had coroded and he kept this as a momento and gave it to me in the 1970's after i bought my 1940 Dodge in 1971........its slightly different to that pictured in that the bottom part of mine is much thinner without that recessed leading edge that yours shows but the overall lower shape appears the same, so I'd say your is probably 1933................andyd

[Mopar-Boy]

it definitely does NOT fit on my 33 dodge which is why I am asking.  re how much do I want for it, I bought it on ebay thinking it was a fit.  Paid 150.  (should have looked closer at the pics... oh well)

 

I'd take 100... 

[Andydodge]

Just checked the reference books I have and from 1935 the passenger car line used an internal radiator cap and the outside Ram was just a fixed mascot..............I know the one I have is definately a 1934 passenger car mascot and does have the actual radiator cap attached underneath and is different to that pictured........so if your new one is not from a 1933 passenger car then maybe its a 33-34 Commercial vehicle or truck cap..........dunno if this helps...........andyd

[bobd1976]

I have 1934 Dodge pickup and this ornament will not fit the 33-34 pickups.

 

[Silverdome]

Definitely not a '33 to '34. The base is way too thick and not the correct shape. Show us a picture of the bottom side so that we may see how it is mounted plus it should reveal a DPCD and a part number if it is an original Dodge ram.