tanda62 Posted September 3, 2018 Report Posted September 3, 2018 After looking at many pages of posts about heat risers I still have a questions I hope someone can answer. My heat riser is missing the anti rattle bit and it looks to be something I can make rather than payout the price for an entire rebuild kit. The issue is what is the material used for the anti rattle? It almost looks like some sort of corded tire plug material. The technical page on heat risers describes it as "dark cloth like material". Thanks for any help, Tom Quote
Dodgeb4ya Posted September 3, 2018 Report Posted September 3, 2018 (edited) Woven asbestos material... Edited September 3, 2018 by Dodgeb4ya 1 Quote
tanda62 Posted September 3, 2018 Author Report Posted September 3, 2018 Hmmmm, awesome guess I won't be using that! ? Thanks for the info and I will find a like substitute. Tom Quote
P15-D24 Posted September 4, 2018 Report Posted September 4, 2018 Something like this on Grainger:10 ft. Compression Packing Seal, 3/16Sq, Flexible Graphite Quote
Plymouthy Adams Posted September 4, 2018 Report Posted September 4, 2018 wet it and wear a dust mask while fitting it... Quote
tanda62 Posted September 6, 2018 Author Report Posted September 6, 2018 Here is my solution for the heat riser and the finished product. Good to have the intake and exhaust installed. 1 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.