Randy Brian Posted May 20, 2018 Report Posted May 20, 2018 Hey guy's, New and need help. is it a harmonic balancer or a vibration dampener? and how do you remove it? mine seems to be in 2 peices with the thick metal part spinning free Thanks Randy Quote
desoto1939 Posted May 20, 2018 Report Posted May 20, 2018 They are called by both names. You will need to us a puller to remove it off the camshaft. They can be rebuilt. look up damperdan if i remember the name correctly. Rich Hartung desoto1939@aol.com 1 Quote
DonaldSmith Posted May 20, 2018 Report Posted May 20, 2018 As I remember, the pulley and damper assembly bolt to a hub. The hub needs a puller to remove, but the pulley can be unbolted. One of the bolt holes is off the mark, so that the pulley can only be installed with the timiing marks in the right location. Similarly, the key in the hub assures its proper location. Quote
Randy Brian Posted May 21, 2018 Author Report Posted May 21, 2018 Thanks for the help. is it a 2 peice deal bulkanized plus the pulley closest to the motor, so I got 3 peices all together and the thick middle one spins freely, the car runs fine but this looks funny to me. This is on a 48 dodge club coupe 3 window. Quote
Randy Brian Posted May 21, 2018 Author Report Posted May 21, 2018 I found another thread about vibration damper, they say some dodge 6 cyl had them and some did not just a pulley, some folks removed theirs with no problems without it. just seems strange to be able to run one without a vibration damper. Quote
Ernie Baily Posted May 22, 2018 Report Posted May 22, 2018 I recently had my 48 Plymouths redone by another company called "Damper Dudes" and they were quite reasonable($140) and quick if I remember correctly. Good Luck! Quote
greg g Posted May 22, 2018 Report Posted May 22, 2018 There are these guys too. Not a recommendation, do your due diligence as with any consumer goods results may vary. https://www.damperdoctor.com Quote
Adam H P15 D30 Posted May 22, 2018 Report Posted May 22, 2018 On 5/20/2018 at 9:09 PM, Randy Brian said: I found another thread about vibration damper, they say some dodge 6 cyl had them and some did not just a pulley, some folks removed theirs with no problems without it. just seems strange to be able to run one without a vibration damper. My Wayfarer does not have a damper but I also read somewhere that a lot of Fluid Drive cars didn't come with them, but who knows. Quote
Branded Posted May 22, 2018 Report Posted May 22, 2018 2 hours ago, Adam H P15 D30 said: My Wayfarer does not have a damper but I also read somewhere that a lot of Fluid Drive cars didn't come with them, but who knows. Same with my 49 Wayfarer. Quote
49roadster Posted May 22, 2018 Report Posted May 22, 2018 Wayfarer no damper, Coronet has damper. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.