Valve removal

[TylerB46]

Guys I’m having a terrible time trying to remove my valves out of a 53 230. I want to lap sand them, but can’t figure out how to get them out. Any help would be great.

[Plymouthy Adams]

get them out as in from the guide bore...or are you having problems removing the keepers.....you will need the proper spring compression tool and ensure that there is no carbon ring on the bottom stem that will prevent pulling the valve from the block

[tom'sB2B]

Sometimes it takes a little pressure to free the little keepers up. Shove a rag in the holes so they don’t fall into the pan. And a magnet comes in handy

[TylerB46]

1 hour ago, Plymouthy Adams said:

get them out as in from the guide bore...or are you having problems removing the keepers.....you will need the proper spring compression tool and ensure that there is no carbon ring on the bottom stem that will prevent pulling the valve from the block

Do you know what the proper tool is called? I only have one for like a brigs and stratton

[P15-D24]

Read this: http://p15-d24.com/page/p15d24/tech/218_teardown.html/

[TylerB46]

2 hours ago, P15-D24 said:

Read this: http://p15-d24.com/page/p15d24/tech/218_teardown.html/

Thank you