Worden18 Posted May 10, 2018 Author Report Share Posted May 10, 2018 May 10: So right after work I drove to my friend’s shop and we get it up on the hoist. We were able to bleed the brakes correctly (it needed that) and then I adjusted the brakes a bit on all 4 wheels. I also snugged up a number of bolts and wiped off some excess oil drips. We ate lunch and then parted ways. Stopped at the school on the way home to pick up the kids. They were excited to see the Meadowbrook. 110 miles logged today! 2 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 10, 2018 Author Report Share Posted May 10, 2018 May 10: at the school. Car ran good today... Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 10, 2018 Author Report Share Posted May 10, 2018 May 10: Final stop at the library. Now headed home. Beautiful sunny 65 degree day! Lots of smiles and people pointing at the Meadowbrook. ? 1 Quote Link to comment Share on other sites More sharing options...
The Oil Soup Posted May 10, 2018 Report Share Posted May 10, 2018 Wow! 104 here, send some of that weather out west. 1 Quote Link to comment Share on other sites More sharing options...
keithb7 Posted May 10, 2018 Report Share Posted May 10, 2018 @Worden18 I am interested in learning what technique your friend used to bleed the brakes. We you in the car pumps while he cracked lines? or did he use some type of vacuum system? We did an awful lot of brake pumping and line cracking over here. I was drafting my wife, son, anyone, to get in the car and pump. Over a period of a couple evenings. Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 11, 2018 Author Report Share Posted May 11, 2018 21 hours ago, keithb7 said: @Worden18 I am interested in learning what technique your friend used to bleed the brakes. We you in the car pumps while he cracked lines? or did he use some type of vacuum system? We did an awful lot of brake pumping and line cracking over here. I was drafting my wife, son, anyone, to get in the car and pump. Over a period of a couple evenings. Keith, I pumped the pedal and my friend cracked the lines. The driver’s front was the only one that needed quite a bit of pumping. Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 (edited) Friday, May 11: You can tell by our attire how cold it is here in MN today. 40s and rainy. Cranked up the heater in the Meadowbrook and drove into town to JT's Bar and Grill for supper. A friend snapped this photo for us. Edited May 12, 2018 by Worden18 2 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 (edited) The Captain and Coke I had with my grilled chicken salad was delightful ? Edited May 12, 2018 by Worden18 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 (edited) Friday May 11: On to the plant sale at the community center.... Edited May 12, 2018 by Worden18 1 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 (edited) Friday May 11: After the plant sale we stopped at the grocery in a neighboring town for a few things. Some little kids that got out of that gray van on the end were pointing at the Meadowbrook and saying "Mommy, look!" over and over again. At least they noticed! Edited May 12, 2018 by Worden18 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 (edited) Here's the heat shield I finally got around to installing, if you want to even call it an install LOL. Its just a leftover piece of pre-formed aluminum from work that just so happened to fit perfectly in there without me having to modify it at all if you can believe it. It actually fits fairly tight, too. The only thing I did to it was put that aluminum block on top that has a recess underneath for the distributor vacuum advance line. I drilled some holes through and put a nut and bolt in each one to keep the heat shield in place just in case it might decide to work its way out from vibration, etc. It will stay attached to that hard line now, so I won't have to worry about it flying out and hitting the fan or something. Seems to work so far. I think it is helping with the fuel percolation, but I have other issues that are contributing to hard starting after letting the car sit for 5-10 minutes, like my crappy carb and my timing is off as well. The car seems to start a bit better now, though. Before the heat shield it would crank and crank and crank before starting again after that 5-10 "fuel burnoff" period. Edited May 12, 2018 by Worden18 1 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 (edited) Here's a cross section view of that heat shield. Edited May 12, 2018 by Worden18 Quote Link to comment Share on other sites More sharing options...
JerseyHarold Posted May 12, 2018 Report Share Posted May 12, 2018 Just a thought....I'd be careful with that plastic fuel filter being near the exhaust manifold. A metal one might be a better idea. Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 (edited) Friday, May 11: A final black and white photo. At home unloading groceries and plants. Edited May 12, 2018 by Worden18 2 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 1 minute ago, JerseyHarold said: Just a thought....I'd be careful with that plastic fuel filter being near the exhaust manifold. A metal one might be a better idea. Agreed. I will probably change it out when I do a tuneup in the near future. Its been on there for almost 7,000 miles now and no problems. With the new heat shield it should be protected a little better as well. Quote Link to comment Share on other sites More sharing options...
Niel Hoback Posted May 12, 2018 Report Share Posted May 12, 2018 WHERE ARE THE DOGS? You shouldn't leave part of the family at home when you go out to play. 1 Quote Link to comment Share on other sites More sharing options...
wldavis3 Posted May 12, 2018 Report Share Posted May 12, 2018 John, When you are having hard starting issues when the engine is hot, are you holding the accelerator pedal to the floor (do not pump) to get extra air into the cylinders ? This seems to work pretty well on my car. Quote Link to comment Share on other sites More sharing options...
The Oil Soup Posted May 12, 2018 Report Share Posted May 12, 2018 Mine also, after warming up and sitting for longer than 5 to 7 minutes it will just crank. So I floor it and within a few seconds it fires up, rev it a little and good to go! 1 Quote Link to comment Share on other sites More sharing options...
Niel Hoback Posted May 12, 2018 Report Share Posted May 12, 2018 Mine did that too, until I put a new coil on it. All fixed. 1 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 3 hours ago, wldavis3 said: John, When you are having hard starting issues when the engine is hot, are you holding the accelerator pedal to the floor (do not pump) to get extra air into the cylinders ? This seems to work pretty well on my car. Hi Bill, I haven't tried that at all. I feared flooding it. But I guess if I don't pump it.... I usually just leave the accelerator alone when starting. I will definitely try this and let you know how it works. Thanks for the tip! Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 12, 2018 Author Report Share Posted May 12, 2018 5 hours ago, Niel Hoback said: WHERE ARE THE DOGS? You shouldn't leave part of the family at home when you go out to play. Don't worry, we'll take them for a ride tonight, or later tomorrow for sure! Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 13, 2018 Author Report Share Posted May 13, 2018 5 hours ago, Niel Hoback said: Mine did that too, until I put a new coil on it. All fixed. I know its not the coil. Its a 40,000v part of the electronic ignition kit. Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 13, 2018 Author Report Share Posted May 13, 2018 (edited) Saturday, May 12: Out for an evening cruise with the kids and the dogs, too. It started to rain when I was warming up the car, but that's never stopped us before. The dogs were so happy to go with! Our male boxer (Mack) ran as fast as he could to the car and jumped in. Edited May 13, 2018 by Worden18 1 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 13, 2018 Author Report Share Posted May 13, 2018 (edited) May 12 cont: Stopped at Subway for supper. The dogs kept their eyes on us from the car. Had to use the wipers and heater. Both work very well. Edited May 13, 2018 by Worden18 Quote Link to comment Share on other sites More sharing options...
Worden18 Posted May 13, 2018 Author Report Share Posted May 13, 2018 (edited) May 12 cont: Poochie photo-bomb! Edited May 13, 2018 by Worden18 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.