Bob Riding Posted April 16, 2012 Report Share Posted April 16, 2012 I am dissassembing my cowl and getting it ready for painting. I'm now working out the dents and learning how to apply body filler where needed (sparingly!) I chose a 1941 Plymouth color - West Point Gold. I think this was the hardest decision of the whole restoration- the stock color was Hampton Beige and with a woodie it's all about the wood and I didn't feel that the beige really enhanced the wood. When I took the hinges off, I found a very thin anti-squeak material wherever there was metal-on-metal. It seems to be a burlap-like cloth - almost an oil-cloth, but very thin. I searched the forum and haven't found mention of it-just the fender and body panel anti squeak threads. A modern replacement would be fine. What have you guys used? Quote Link to comment Share on other sites More sharing options...
TodFitch Posted April 16, 2012 Report Share Posted April 16, 2012 I searched the forum and haven't found mention of it-just the fender and body panel anti squeak threads. A modern replacement would be fine. What have you guys used? You might be able to use a layer or two of friction tape for that anti-squeak material. Friction tape is basically just tar impregnated cloth. It is available in the electrical supply section of any better home center or hardware store. Quote Link to comment Share on other sites More sharing options...
RobertKB Posted April 16, 2012 Report Share Posted April 16, 2012 Tar paper works, too. I used it right throughout my '38 Chrylser when I did it and it remains squeak free. Friction tape as mentioned would probably be better though. Never thought of that. Maybe I should pull my '38 apart and redo all the tar paper. Not!!! Quote Link to comment Share on other sites More sharing options...
Dan Hiebert Posted April 16, 2012 Report Share Posted April 16, 2012 I bought a roll of that anti-squeek stuff from Andy Bernbaum almost twenty years ago, (its actually called "anti squeek", too), haven't checked that site for a long time (I heard on this forum that he sold the shop, but the buyer is continuing the business). I used it to put the Dodge back together way back when, and am still finding uses and will have enough left to do the Terraplane when the time comes. Its not really that thin, just crimped under pressure for all those years. Its a heavy duty weaved cloth. I think its impregnated with some sort of oil or parafin, but its not "soaked". Quote Link to comment Share on other sites More sharing options...
Bob Riding Posted April 17, 2012 Author Report Share Posted April 17, 2012 Great info...friction tape it is! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.