The Steering Wheel Guy

[PatS....]

Located in Edmonton, Alberta, Canada

http://drive.to/stwheels

I do not know him, have never done business with him. Not many steering wheel restorers out there so one more option.

[55 Fargo]

Ed Pauch ( located in Winnipeg Mb. )from Yahoo's PWHM 46 to 48 Chryslers, redoes steering wheels, he also relaminates glove box doors,and re-pops several items like window crank knobs, lighter/shifter knobs manufacturer tags, and number of other items, he makes the tail light reflectors too....

[martybose]

Here's the Australian outfit:

http://www.pearlcraft.com.au/welcome.htm

Check out the 1950 Plymouth steering wheel on the custom page.

Marty

[aero3113]

Nice work,they even cut it down if you want.

http://www.pearlcraft.com.au/images/rim%20reductions/Rob%20Goldsmith-Plymouth%2750%20for%20cut%20down/03%20%2750%20Plymouth-Cutdown%20to%2016in-Custom%20Orange%20&%20White%20Pearl%20001.jpg

[Frank Elder]

Located in Edmonton, Alberta, Canada

http://drive.to/stwheels

I do not know him, have never done business with him. Not many steering wheel restorers out there so one more option.

Everytime I click on your site my computer shuts down.

[41/53dodges]

me thinks you has a virus or a f****d up computer

[Frank Elder]

Sometimes my McAfee goes overboard.

[Young Ed]

Ditch mcafee get kaspersky.

[claybill]

restoring steering wheels is the easiest thing!! no matter how chewed up or missing sections...you can build it up so easily after "V" ing out all cracks and filling with PC-7 epoxy, packing in tight layers..file and sand smooth and prep to your talents..I used rustoluem rattle can and then after a WEEK of drying rustoleum clearcoat.

mine arent 100% but they are 98% and only 20 bucks!

claybill

[PatS....]

Mine had no plastic at all, anywhere. The rim and spokes were just wire. Nothing to patch and the chrome trim base had to be built from scratch to match the shape of the trim on the wheel in which the horn rim sat. Not an easy task I don't think.

The guy who did mine sent it back looking like a factory Chrysler wheel.

An excellent job starting from scratch.

Before

After

[P-12 Tommy]

restoring steering wheels is the easiest thing!! no matter how chewed up or missing sections...you can build it up so easily after "V" ing out all cracks and filling with PC-7 epoxy, packing in tight layers..file and sand smooth and prep to your talents..I used rustoluem rattle can and then after a WEEK of drying rustoleum clearcoat.

mine arent 100% but they are 98% and only 20 bucks!

claybill

That's what I plan on doing to mine here down the road. You can get this at the local ACE hardware.

[55 Fargo]

That's what I plan on doing to mine here down the road. You can get this at the local ACE hardware.

Me Three , will be doing this myself

[Greenbomb]

Thanks for the info- I'm just about to do mine and wasn't sure about what to use. was going to try Bondo. This sounds better.

[claybill]

when patching and fixing...be smart..use gouges and undercuts, rough surfaces adhere better than smooth, do it in 1/4 in layers..PC-7 is magic stuff.! it adheres to rubber! steering wheels are cast from a rubber compound, not plastic.

PC-7 is structural when cured, bondo is only a filler...not structural.!

good luck....easy to fix any mistake. possible to repair missing chunks too.

bill