garys_bc Posted April 27, 2009 Report Posted April 27, 2009 I have a dumb question. My 47 dodge (6 volt) has what appears to be a resistor attached to the generator. I had some work done and the one wire coming out of it was disconnected. The resistor is fastened directly into the generator with one screw, it has one wire coming out of it. My question is what does it do? Which terminal should it be connected to? And do I need it? Thanks I always get the best advice from here. Gary Quote
Don Coatney Posted April 27, 2009 Report Posted April 27, 2009 The resistor is a radio noise supressor. Has no other function. If you have noise in your radio replace it. If you do not have a radio or it does not work do nothing. Quote
TodFitch Posted April 27, 2009 Report Posted April 27, 2009 I have a dumb question. My 47 dodge (6 volt) has what appears to be a resistor attached to the generator. I had some work done and the one wire coming out of it was disconnected. The resistor is fastened directly into the generator with one screw, it has one wire coming out of it. My question is what does it do? Which terminal should it be connected to? And do I need it? Thanks I always get the best advice from here. Gary I think that "resistor" is actually a capacitor. But Don's advise holds true: Its for keeping radio frequency noise (from the generator brushes arcing slightly) from disturbing your radio listening pleasure. Quote
Niel Hoback Posted April 28, 2009 Report Posted April 28, 2009 I think its a condenser, not a capacitor. Yes, I'm a nit-picker. Quote
garbagestate 44 Posted April 28, 2009 Report Posted April 28, 2009 A condenser and a capacitor are the same thing in vintage electronic terms. Quote
sscheutzow Posted April 29, 2009 Report Posted April 29, 2009 Here's some detail from the 1940 Plymouth radio install booklet. Fig 6 in the lower right reads: "Install the generator condenser on the generator. It must be mounted under the ground wire screw and connected to the "A" terminal. Scott. Quote
garys_bc Posted May 1, 2009 Author Report Posted May 1, 2009 As usual you guys have the best information. Thanks. Quote
sscheutzow Posted May 1, 2009 Report Posted May 1, 2009 Thanks guys. Here's a link to a scanned PDF of the 1940 Plymouth, Chrysler, Dodge, and Desoto radio installation and owners manual. This is the entire brochure and is easier to read. Scott. http://mysite.verizon.net/sms40/40_radio.pdf Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.