OUTFXD Posted yesterday at 07:07 AM Report Posted yesterday at 07:07 AM For those of you not following. I had a mechanic disappear with a bunch of my engine parts. I found a guy selling balancer, collar, and pulley for a 1949 Dodge P18 Flathead 6. bulk dealer with no idea what size engine this came off. What are the chances that these will fit/function properly on my 1946 Plymouth P-15 with a 218 Flathead 6? Thanks in advance! Quote
Doug&Deb Posted yesterday at 09:26 AM Report Posted yesterday at 09:26 AM At some point the pulley width changed and I’m not sure what year that was. I believe it will bolt on with no problem though. 1 Quote
Los_Control Posted yesterday at 01:25 PM Report Posted yesterday at 01:25 PM Not suggesting it is ideal, the narrow belts work fine on the wider pulley's ... So if the crankshaft pulley was narrow you could just run a narrow belt. ..... My 1950 218 engine has wide pulleys. Previous owner had installed a newer generator with narrow pulley and ran a narrow belt .... I replaced that with a alternator and still running a narrow belt. You could not run a wide belt on narrow pulley, you can run narrow belt on wide pulley. Find out what the guy's bail is .... maybe pay his bail and get your parts back and let him work off bail with labor? 1 Quote
Solution desoto1939 Posted yesterday at 06:05 PM Solution Report Posted yesterday at 06:05 PM Here is a page from my tristate mopar venders catalog on the vibration dampener. Hope this helps you. Rich hartung desoto1939@aol.com 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.