Harley PHD Posted Monday at 03:27 PM Report Posted Monday at 03:27 PM Anybody have a source for the molding clip for a 1950 coronet rear molding between the windshield and the trunk? Quote
LazyK Posted Monday at 03:32 PM Report Posted Monday at 03:32 PM (edited) Restoration specialties PDF catalog available on line https://www.restorationspecialties.com/ Edited Monday at 03:48 PM by LazyK Quote
joecoozie Posted Monday at 03:33 PM Report Posted Monday at 03:33 PM (edited) l Edited Tuesday at 05:16 AM by joecoozie Quote
Ivan_B Posted Monday at 03:34 PM Report Posted Monday at 03:34 PM How many do you need? How about just making one yourself from some spring steel wire? The curvature does not look too complicated Quote
Harley PHD Posted Tuesday at 04:24 AM Author Report Posted Tuesday at 04:24 AM I thought it would be easier to buy a set of them. I made some years ago, but the coat hanger wire I used rusted away. That restoration specialties catalog has to many choices, it will take me a while to go through them. Quote
Harley PHD Posted Tuesday at 05:09 AM Author Report Posted Tuesday at 05:09 AM I think I found one in that catalogue. The shipping cost as much at the clips. part# B1420 from Restoration Specialties, I'll tell you if it is the right part when they come in. Quote
9 foot box Posted Tuesday at 05:38 AM Report Posted Tuesday at 05:38 AM You could call them or email to determine if it’s correct to your measurements. They had responded to my inquiry’s in the past. Rick D. Quote
kballein Posted Wednesday at 02:29 PM Report Posted Wednesday at 02:29 PM I used a 3d printer for the clips. I have the clips for below the rear window and the ones over the rear quarter and/or doors. The hold tite and are not too difficult to use. They are single use and will most likely break when trying to remove. I can send you the 3mf files for printing if you like. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.