greg g Posted April 23, 2021 Report Posted April 23, 2021 (edited) Have an old 5 horse tecumseh engine. Starts and runs, bogs and stalls under load after running for 5 to 10 minutes. Did compression test today cold. Got 60 dry, just under 70 with a squirt of ATF Evaluating for keep it or chuck it. It is on a 1990 or so snowblower. Two or three years back I had to grind down the exhaust valve stem as the seat had eroded and valve wasn't sealing, so I trimmed the stem till there was some lash around 08 or 10 ths Only put maybe 8 hours since that was done. Edited April 23, 2021 by greg g Quote
Plymouthy Adams Posted April 23, 2021 Report Posted April 23, 2021 might be time to square up the exhaust seat and refresh the valve.... Quote
Tooljunkie Posted April 23, 2021 Report Posted April 23, 2021 Would need to check for spark and compression immediately after it quits. Water in fuel tank is something else to check for. condensors and coils go bad when they heat up too Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.