Cudan Posted February 21, 2021 Report Posted February 21, 2021 Hi, i am missing this part nr 5-44-8 stop, see red on the pic, on my master cilinder, is this a metal part ? Or is it a gasket. Quote
Sniper Posted February 21, 2021 Report Posted February 21, 2021 It's metal and is designed to keep the piston in the master cylinder. You could fab one out of sheet metal. Quote
Cudan Posted February 21, 2021 Author Report Posted February 21, 2021 Thanks, sheetmetal thickness 2 mm ? Dan Quote
Plymouthy Adams Posted February 21, 2021 Report Posted February 21, 2021 as they said....the collar is just to retain the dust cover... Quote
Sniper Posted February 21, 2021 Report Posted February 21, 2021 2mm might be a bit thin, 3mm is the minimum I's use, actually I'd use 1/8" but being where you are 3mm is more easily obtained. Quote
Cudan Posted February 22, 2021 Author Report Posted February 22, 2021 Thanks, I will fab one myself. Dan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.