47Nik Posted April 13, 2020 Report Share Posted April 13, 2020 (edited) Got this extra flattie I dont need, what's it worth and what is it exactly. Edited April 13, 2020 by 47Nik added pics Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted April 13, 2020 Report Share Posted April 13, 2020 (edited) if that is a P9 then it is 40 Plymouth....201 cubes.. Edited April 13, 2020 by Plymouthy Adams 1 Quote Link to comment Share on other sites More sharing options...
47Nik Posted April 13, 2020 Author Report Share Posted April 13, 2020 I guess it is a P9 by the last pic I posted. It was in a '47 I sold, surprised it's a 1940 model year. Quote Link to comment Share on other sites More sharing options...
BobT-47P15 Posted April 14, 2020 Report Share Posted April 14, 2020 That first number of 9-12-39 is probably the casting date of the block.......in 1939, to be used in a 1940 model car.....a P9 model. Quote Link to comment Share on other sites More sharing options...
greg g Posted April 15, 2020 Report Share Posted April 15, 2020 Not surprising, engine swaps were common back then. If your engine got tired, and they did at about 50 to 60 k, you found a low mileage wreck and did a swap instead of a rebuild. Quicker and cheaper. My dad had an engine in his 49 Dodge swapped for like 200 bucks installed at the local junk yard, including the engine. Dropped off after work on Friday, picked it up sat after lunch. Quote Link to comment Share on other sites More sharing options...
47Nik Posted April 16, 2020 Author Report Share Posted April 16, 2020 I can see how fast you could do that swap lots of room and very simplistic wiring. That's why I love these old cars or any old piece of equipment or automobile. It's easy to trouble shoot and easy to fix. Quote Link to comment Share on other sites More sharing options...
Bob Riding Posted April 16, 2020 Report Share Posted April 16, 2020 As for the value, It depends on if it turns over, runs, etc. The later Plymouth flatties (the 218 starting in'41 I believe, and the 230 starting in '54?) had more hp, tongue and a beefier bottom end. I've seen running motors go for $200-300 here in CA. A few years ago there was a fellow on the Forum who had a '40 Plymouth and wanted a '40 motor to be authentic. I had one, but shipping to his location on the east coast cost more than the motor was worth. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.