clutch fork return spring

[David Mac]

I have searched the site for any info on clutch fork return spring. mine is broke and I need to replace it. does anyone have one they would like to part with or know of an aftermarket spring that I can use.

Thanks & Regards

David

[Don Coatney]

Nothing magical about the spring. Any hardware store should have one that will work. 

 

 

[DrDoctor]

 .

Edited September 4, 2018 by DrDoctor

[classiccarjack]

10 hours ago, DrDoctor said:

Take the broken one to an auto parts store—they should be able to provide you with an appropriate replacement.

The Dr is right... 

 

I also noticed a new assortment in the Help section.  I am thinking of taking a closer look to see if the springs are made in the correct gage...  They may have been carburetor springs also.  If it's fruitful, I will let you know with a part #...

.

[vintage6t]

Agree  you should be able to find one off the shelf at the auto parts store. If not, my local True Value hardware store has a good selection of springs, so you might try one of those stores as well.

[John Norlien]

I might also suggest sources like McMaster -Carr

[Plymouthy Adams]

sometimes at a wrecking yard one can find a seat positioning lever return spring that would be appropriate for this application..

[Flatie46]

Mine was intact when I was working on this area of the car but it was almost worn in two. I took it to NAPA that had a shadow board their that matched up common springs. I guess I should have posted my info or made note but I didn't. Anyway hope this helps.

[David Mac]

Thanks, everyone for your replies. I will search out these options