jpartington Posted September 5, 2016 Report Posted September 5, 2016 (edited) On my 52, PO installed an after market water temp gauge and sender I'm assuming because the original was not working. I looked into the original, which was still dangling in the engine bay, and found that the cable from the gauge to the probe was broke so the probe and bushing were seperate from the cable. Is this repairable? Does the piece on the end of the cable come off? (The attached photo) I guess for for some reason the upload failed I guess I will try again later Edited September 5, 2016 by jpartington Quote
DJ194950 Posted September 5, 2016 Report Posted September 5, 2016 search on this forum for- water temperature gauge repair- There are some ways to do this show. Happy hunting. DJ 1 Quote
TodFitch Posted September 5, 2016 Report Posted September 5, 2016 Another suggestion to use the search feature gets posted. You can find results by typing "temperature gauge repair" in to the search function. But, I'll save you that and post the first couple of results from that effort: Quote
B1B Keven Posted September 5, 2016 Report Posted September 5, 2016 If you don't want to try repairing it yourself, I can do it. Quote
Reg Evans Posted September 5, 2016 Report Posted September 5, 2016 Yes, Keven did a great job repairing my '39 Chrysler temp gauge. Highly recommended ! Quote
jpartington Posted September 5, 2016 Author Report Posted September 5, 2016 How much do you charge? Quote
TodFitch Posted September 6, 2016 Report Posted September 6, 2016 Commercial discussions should be done over the private message (PM) facility rather than in a general discussion thread. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.