1941 Chrysler Windsor Vacamatic Trans Swap?

[wayfarer]

...with that tiny 1/8" line it certainly cannot be a full-flow....

 

You may need to remove the cartridge and see what it is to start with, then you can cross-reference part numbers.

[Young Ed]

Looks similar to mine. I use a Napa 1010. Which will cross to a WIX by adding either 2 or 5 in front. I forget which is for WIX and which is the cheaper napa line. The best bet as mentioned is pull the lid and see what # is in there currently. Hope its not a roll of TP.....

[1949 Wraith]

Looks similar to mine. I use a Napa 1010. Which will cross to a WIX by adding either 2 or 5 in front. I forget which is for WIX and which is the cheaper napa line. The best bet as mentioned is pull the lid and see what # is in there currently. Hope its not a roll of TP.....

Thanks for the info.

if I order one the worst case I have to return it. I prefer not to take it apart until I have a cartridge and gaskets, I took the unit I had on my Chevy apart to see the cartridge number, then gaskets would not seal and it took about 5 days for a new one to come in.

 

There is a big Moparfest in the area on the weekend and I hope to pick one up there.

Edited August 18, 2016 by 1949 Goat

[greg g]

NAPA1080 or 1080 gold also dependingon the gasket.