ruff1148kr Posted May 30, 2015 Report Posted May 30, 2015 Dose anyone have a pic or the sizes of the screws that are used for center divider bar on windshield, looks like the go thru fron inside to out, and also the screws for the U shap window moulding not sure of lenght or style of either one. Quote
ggdad1951 Posted May 31, 2015 Report Posted May 31, 2015 they are unique screws. I have some if you need any. Quote
ruff1148kr Posted May 31, 2015 Author Report Posted May 31, 2015 I have 1 of the u trim screws but was not sure it was correct and none for of divider bar. Any help I can get to get some good one's will help email ruff11148kr@frontier.com Quote
ggdad1951 Posted May 31, 2015 Report Posted May 31, 2015 here is a picture of both sizes. The head type is Countersunk (Oval) Raised. I have see the division bar one also come with a flattened end and not pointed. Quote
ruff1148kr Posted June 1, 2015 Author Report Posted June 1, 2015 wow, thanks for the great pics. Don't think they will have them around here let me know if I can buy some off you or something Quote
ggdad1951 Posted June 1, 2015 Report Posted June 1, 2015 I got a mess of screws....PM me your addy and I'll drop some in the mail. Quote
NiftyFifty Posted June 1, 2015 Report Posted June 1, 2015 If you have installed a new windshield gasket and it's from Roberts, I found my holes not to be all in the correct spot, the inner and outter centre bar are the same spacing up or down, but the gasket holes just wernt quite on for the top and bottom holes. Did manage to get new trim scores through Hedalts (sp) in Bismarck, but they are sharp end. I can see why they glass ten them, one of my original screws wasn't when I got the truck and they screwed a hole right though the outter bar. Quote
ruff1148kr Posted June 1, 2015 Author Report Posted June 1, 2015 wow thanks for the tip on the gasket holes will have to look at that (I have a steele rubber gasket.) will make sure to dull tips some if screws I get are not. Quote
NiftyFifty Posted June 2, 2015 Report Posted June 2, 2015 Good call, I'm not real pleased with that gasket, as are others on the site, but less money and a lot of the other gaskets are very correct.....if you get sent enough of it lol Quote
The Oil Soup Posted June 3, 2015 Report Posted June 3, 2015 On my Steele gasket the holes lined up fine. Quote
Brent B3B Posted November 13, 2015 Report Posted November 13, 2015 Possible replacement for when we deplete ggdad's stock Quote
FargoMarty Posted November 14, 2015 Report Posted November 14, 2015 Text in the ad says it's per 25 screws. 1 Quote
FargoMarty Posted November 14, 2015 Report Posted November 14, 2015 Don't know how the highlighting got on the "per 25 screws" in my previous post. Wasn't trying to sound smart or have a shot at anyone. Quote
Don Coatney Posted November 14, 2015 Report Posted November 14, 2015 The highlighted per 25 screws is a link automatically added due to the key words. Quote
FargoMarty Posted November 15, 2015 Report Posted November 15, 2015 Now the highlighting's gone. ?? Guessing it's because the linked page didn't directly match the issue being discussed, but curious how it happens. Quote
Don Coatney Posted November 15, 2015 Report Posted November 15, 2015 Now the highlighting's gone. ?? Guessing it's because the linked page didn't directly match the issue being discussed, but curious how it happens. Good question for GTK. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.