pflaming Posted March 26, 2015 Report Share Posted March 26, 2015 I cleaned the doors and now do not know for certain what the pattern is. I know that some of the seal is on the cab and continues on the door, but not certain just where. Anyone have a good picture:? Quote Link to comment Share on other sites More sharing options...
JBNeal Posted March 31, 2015 Report Share Posted March 31, 2015 (edited) ya might have to use your imagination on these cuz these are original seals that are in poor condition and partially missing... on the cab, the seal starts at the bottom of the rear of the door frame and continues to the seam on the A-pillar: on the sill, the seal goes from the A-pillar to the rear of the door frame but does not cross to the cab sill: on the door, the seal goes from above the vent window, between the hinges, to the bottom of the door: Edited September 3, 2021 by JBNeal revised pictures 1 Quote Link to comment Share on other sites More sharing options...
pflaming Posted March 31, 2015 Author Report Share Posted March 31, 2015 Thanks JB. My seals came fron Roberts. I called them and was informed that: they have two seal styles which are attached differently. For The style I have the seal is attached only to the door. Quote Link to comment Share on other sites More sharing options...
jonkmahl Posted August 5, 2020 Report Share Posted August 5, 2020 Well this is most informative, and I admit a bit confusing. Seems there are several ways its been done. So thanks for all the input. The kit I received came in 3 pieces, one is the for lack of a better word fluted with a square body that attaches and a lip if you will that seals against the opposite part. This piece is long enough to go from all the way around the door save the bottom. The second piece is for the bottom and is rounded and pinched in the body area. The third as I remember is rectangular about 3/4 to 1" and is also quite long. Cheers. Quote Link to comment Share on other sites More sharing options...
Aaron F Posted August 6, 2020 Report Share Posted August 6, 2020 Ok I've got pictures of how the door seals go on, but I can't seem to put pictures on here, I can e-mail them to someone to put on Quote Link to comment Share on other sites More sharing options...
JBNeal Posted August 7, 2020 Report Share Posted August 7, 2020 Since photobucket is still holding files hostage, I started uploading jpgs to my account on this site, but I have to downsize the resolution because of file attachment restrictions...typically I downsize to 640x480 or thereabouts, which gets my 3Mb pics down to about 100kb... Quote Link to comment Share on other sites More sharing options...
ggdad1951 Posted May 26, 2023 Report Share Posted May 26, 2023 On 8/4/2020 at 10:17 PM, jonkmahl said: Well this is most informative, and I admit a bit confusing. Seems there are several ways its been done. So thanks for all the input. The kit I received came in 3 pieces, one is the for lack of a better word fluted with a square body that attaches and a lip if you will that seals against the opposite part. This piece is long enough to go from all the way around the door save the bottom. The second piece is for the bottom and is rounded and pinched in the body area. The third as I remember is rectangular about 3/4 to 1" and is also quite long. Cheers. The seals will require some trimming, just because they come as long as they do, doesn't mean they are the "right" length. Look at the pics and vids posted here and make your mind up for you and get it done. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.