derek_m Posted February 27, 2014 Report Posted February 27, 2014 i may have not been searching the right terms....but does anyone know of a template for the front shock relocation? looking to make a set of brackets to weld onto the frame. plenty of steel plating here under the workbench....thank you. Quote
Plymouthy Adams Posted February 27, 2014 Report Posted February 27, 2014 a number of companies make these..their design or TEMPLATE you ask would be proprietary...I personally would not post one and cut into their design and infringe on their means of making a living. I will go further to say that it is not rocket science and to that end to design one's own mount would be the best bet here. Quote
Dan Hiebert Posted February 27, 2014 Report Posted February 27, 2014 (edited) Some have met with success using F-1 shock mounts bolted to the frame. Readily available items apparently. A Forum search will yield more info than I can remember. It's been discussed quite a bit in the past. "Shocks" or "'shock mounts" will have results. Edited February 27, 2014 by Dan Hiebert Quote
littlemo Posted February 27, 2014 Report Posted February 27, 2014 (edited) A fellow forum member, Charlie Akers at www.olddaddy@rustyhope.com sells them as well as front disc brake conversions. I bought a pair from him but never used them as I used the F-1 type ( actually think mine were from a 37 Dodge pickup ?? bought from Dezeldoc on this forum. ), If your interested, pm me. Cass, alias littlemo... Edited March 1, 2014 by littlemo Quote
OldDad67 Posted February 27, 2014 Report Posted February 27, 2014 i may have not been searching the right terms....but does anyone know of a template for the front shock relocation? looking to make a set of brackets to weld onto the frame. plenty of steel plating here under the workbench....thank you. I used the Furd F150 front shock mounts, then I made 2 3/8 nut plates to go on the inside of the frame rails. I fished them up into the frame with a piece of wire. I will at some point probably rosette weld them in place after I test drive them for awhile. Hope this helps with your project. Quote
fstfish66 Posted February 28, 2014 Report Posted February 28, 2014 I used the Furd F150 front shock mounts, then I made 2 3/8 nut plates to go on the inside of the frame rails. I fished them up into the frame with a piece of wire. I will at some point probably rosette weld them in place after I test drive them for awhile. Hope this helps with your project. every time i see a pair of these some thing is messd up one at least one of them,,,im looking for a set of these as well what all did they come on ? 30s ? 40s? 50s? trucks? Quote
OldDad67 Posted February 28, 2014 Report Posted February 28, 2014 every time i see a pair of these some thing is messd up one at least one of them,,,im looking for a set of these as well what all did they come on ? 30s ? 40s? 50s? trucks? Not being a Furd guy I think they came on early 50's trucks. You can buy repo's at Speedway. http://www.speedwaymotors.com/search.html?query=shock+mounts Quote
HughForrest Posted February 28, 2014 Report Posted February 28, 2014 Here you go- shock mount template on the 1st post: http://www.jalopyjournal.com/forum/showthread.php?t=215548 1 Quote
fstfish66 Posted February 28, 2014 Report Posted February 28, 2014 Not being a Furd guy I think they came on early 50's trucks. You can buy repo's at Speedway. http://www.speedwaymotors.com/search.html?query=shock+mounts thanks didnt know speedway sold those,,and the link posted below yours shows one on the hamb,breaking im sure due to him heating and bending it,,, Quote
derek_m Posted March 1, 2014 Author Report Posted March 1, 2014 Thanks HughForrest. Just what I was looking for Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.