woodjunky Posted November 29, 2012 Report Posted November 29, 2012 Last night I pulled the wheels off of my 49 to repack front bearings and inspect all four brake shoes. The left front and right rear were left hand threads. I believe I read somewhere that these both were supposed to be on the same side. If so which is correct ? Quote
desoto1939 Posted November 29, 2012 Report Posted November 29, 2012 Yes you are correct that the left hand threaded lug nuts should be onthe driver side of the vehicle. Looks as if the prior owner chnaged the drive axle with a left hand treaded one. rich Hartung Desoto1939@aol.com Quote
Young Ed Posted November 29, 2012 Report Posted November 29, 2012 Yes you are correct that the left hand threaded lug nuts should be onthe driver side of the vehicle. Looks as if the prior owner chnaged the drive axle with a left hand treaded one.rich Hartung Desoto1939@aol.com Changing the axle doesn't do it. I would say someone changed the brakes and didn't get the rear drums back on the proper sides. My 46 was like that too I just swapped them back to the proper sides. 1 Quote
Don Coatney Posted November 29, 2012 Report Posted November 29, 2012 Yes you are correct that the left hand threaded lug nuts should be onthe driver side of the vehicle. Looks as if the prior owner chnaged the drive axle with a left hand treaded one.rich Hartung Desoto1939@aol.com Young Ed is correct. Axle has no bearing so to speak. The drums are where the bolts connect. Quote
Prusakowski Posted May 27, 2017 Report Posted May 27, 2017 New to dually wheels - is it best to have a Budd four-point socket or can an other socket can be used? Quote
Dodgeb4ya Posted May 28, 2017 Report Posted May 28, 2017 Use the proper Budd Lug Nut tool. Or Dual purpose Impact Socket. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.