50CoupeMan Posted July 13 Report Posted July 13 (edited) May help others reduce body roll. Sway bar fit well used off shelf 7/8” bar kit for 58-64 Impala. It is 39” between holes. Great clearances. Welded 3/16 x 1 5/8 x 4” straps and kit brackets to lower A Frames. Used existing holes for frame mounts. Drilled two front mount holes. Edited July 15 by 50CoupeMan Added photo to help others 1 Quote
Doug&Deb Posted July 14 Report Posted July 14 Can you post some pictures? It might help someone else do this mod. Quote
Kilgore47 Posted July 18 Report Posted July 18 Thanks for this post. One of our car group members has several 63 and 64 chevy Impala's. And he replaced the front end on one of them. Like most old car people he doesn't throw stuff away. I asked him about it and he gave the sway bar to me. I just have to track down a mounting kit for it. The 47 P15 has a front sway bar but it's tiny. This one from a 64 Impala should make a big difference. Quote
Plymouthy Adams Posted July 18 Report Posted July 18 my 48 has a fairly massive sway bar in place......🔧 Quote
OldDad67 Posted November 23 Report Posted November 23 Will this 58 to 64 Impala sway bar also fit a 1948 P15 as well as the 50? Quote
Plymouthy Adams Posted November 25 Report Posted November 25 you have not shown us anything to reference to assist in answering your question.... Quote
OldDad67 Posted November 25 Report Posted November 25 You didn't understand my question? I thought it was self explanatory. Will a 1958 to 1964 Impala front sway bar fit a 1948 P15. Are the 48 and 50 frames similar enough that the bar will fit both? Hope this helps. Quote
Plymouthy Adams Posted November 25 Report Posted November 25 On 11/23/2024 at 2:26 PM, OldDad67 said: Will this 58 to 64 Impala sway bar also fit a 1948 P15 as well as the 50? maybe I did misread, the WILL THIS is in question form and I had thought you had left off the picture......many folks here have little to no X brand part specs... Quote
OldDad67 Posted November 25 Report Posted November 25 50 Coupe man answered back that the 58 to 64 Impala front sway bar will fit both the 50 and 48 frame. Just for clarification in case someone else wants to know. Thanks for your input. Hope this info helps others. Have a great Turkey day! Quote
OldDad67 Posted Tuesday at 09:37 PM Report Posted Tuesday at 09:37 PM 50 Coupe man: Just wanted to thank you on this Christmas eve for the info on the Impala Sway bar. I bought one from Speedway and finished the installation yesterday. As you said it fit like a glove. It's been too wet to drive after all I live in the Pacific Northwest Ha. Just wanted to let know about the fit on my 48 P15. Thanks again for your input. Also for information I used a Tri-5 Chevy e-brake assembly to go along with my Tri-5 Chevy rear axle. I'm sure Plymouthy Adams will chime in! Ha I always enjoy his feedback. Quote
Plymouthy Adams Posted Tuesday at 11:55 PM Report Posted Tuesday at 11:55 PM glad you got it fitted, looks healthy enough for sure..... Quote
OldDad67 Posted yesterday at 12:44 AM Report Posted yesterday at 12:44 AM 50 Coupe man: Just wanted to thank you on this Christmas eve for the info on the Impala Sway bar. I bought one from Speedway and finished the installation yesterday. As you said it fit like a glove. It's been too wet to drive after all I live in the Pacific Northwest Ha. Just wanted to let know about the fit on my 48 P15. Thanks again for your input. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.