Jump to content

Electric fuel pump


jgreg53

Recommended Posts

Just now, Sam Buchanan said:

The aftermarket tank in my car just has a metal tube extending from the tank fitting to the bottom of the tank, no filter or sock. Probably a good idea for those of us with these tanks to drain (flush?) it every year or so to remove any particulate that might accumulate.

I agree, sounds like @jgreg53 has a floater inside the tank. Using the air freed it from the tube for now ..... sooner or later it could end back up in the tube.

Possible it floats around & deteriorates into smaller pieces & gets sucked into the filter .... anybody's guess if problem comes back again.

 

Glad they got it figured out though.

Link to comment
Share on other sites

I like the way my P15 runs with timing set at 8-10* BTDC (strobe at idle, vacuum advance connected). Did you file the points before or after you set timing? Timing needs to be set after gapping points because changing point gap changes timing.

 

Are you referring to cold or hot hard starts?

Edited by Sam Buchanan
Link to comment
Share on other sites

I learned years ago, anytime you mess with points I like to use a business card from my wallet from some salesman.

I just use the card to wipe the oil off the points, close them insert card & pull it through.

Be surprised if you are using a white card how much dirt & oil comes off a new set of points after installed.

 

May not be your issue, but I remember cars that would not start after messing with the points & cleaning them worked. .... Just saying.

 

I would swipe the paper card through 2 or 3 times til it came out clean.

New points from the factory had oil ... feeler gauges had oil or left dirt .... dirt on the points created a problem .... just make sure it is not your problem.

 

Setup correctly and I know you have done much work to do so, they start pretty easy

 

Link to comment
Share on other sites

I did just as I said. I have the electric pump wired to the battery with a fuse and a toggle switch. My mechanical pump seems to be working. I switch on the electric for a few seconds and she starts right up. The mechanical has a leak issue.

  • Like 1
Link to comment
Share on other sites

So the leak is coming from a cracked top half where the out fuel line connects. I took the top half from another pump. Attached it to the bottom half.  The early leak is gone. She will run for about 3 minutes and choke down. If I turn on the electric pump while she's  running the electric pump  will overwhelm the mechanical pump and make it leak.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use