DJK Posted July 22, 2023 Report Posted July 22, 2023 Does anyone have a source or part number for the inverted flare fitting 3/16" X 1/8" with a .030 orifice opening for the bypass oil filter fittings that attach to the 218 block? I have tried my local mom and pop auto parts store, Mcmaster/Carr, Edelmann etc. Thanks. PS the Edelmann part number is 124320, but the orifice is too large. Quote
Solution Sniper Posted July 22, 2023 Solution Report Posted July 22, 2023 Solder it closed and drill a .030" hole in it. 1 Quote
Dodgeb4ya Posted July 22, 2023 Report Posted July 22, 2023 Oil pressure gauge uses the smallest oriface fitting to eliminate needle fluctation. Use the typical larger #124320 fittings on the oil filter. 1 Quote
D35 Torpedo Posted July 22, 2023 Report Posted July 22, 2023 (edited) 29 minutes ago, Dodgeb4ya said: Oil pressure gauge uses the smallest oriface fitting to eliminate needle fluctation. Use the typical larger #124320 fittings on the oil filter. Are you sure? I thought the restrictor was there to prevent a drop in oil pressure. When I salvaged my oil filter system it was plumbed with the restrictor on the filter. EDIT I just took a look and it is as Dodgeb4ya said. Small hole on the gauge. Edited July 22, 2023 by D35 Torpedo Quote
DJK Posted July 22, 2023 Author Report Posted July 22, 2023 56 minutes ago, Sniper said: Solder it closed and drill a .030" hole in it. That was my next thought. Quote
DJK Posted July 24, 2023 Author Report Posted July 24, 2023 As per Sniper, I soldered it then drilled it with a .030 bit. Thanks guys. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.