Sisson auto choke clips

[MarcDeSoto]

I just put my Sisson auto choke on my exhaust manifold.  I have the clip holding the rod on the Sisson device, but I need the clip that holds the rod onto the carburetor.  I measured the size of the rod, and it is a number 8.  what size clip shoud I buy?  There are clips on Ebay, but none say they are for a no. 8 rod.  Do they go by fraction?  

[Doug&Deb]

Generic carb linkage clips are what I used. Take the link to your local parts store. Be mindful that there are left and right clips. 

[LeRoy]

I needed a few and bought a Dorman 41017 set for about 10 bucks. It has 2 or 3 sizes, the one I needed was included.

[Sniper]

I have too imagine finding carb parts on the shelf these days is getting rare.  Not that I have looked recently.

[MarcDeSoto]

I ordered some carb linkage clips from NAPA like LeRoy and the smallest size did fit.  There is a left and right clip.  You can't turn the left clip around to make a right clip.  So it fit my no. 8 rod that comes out of the Sisson Auto choke.  

Edited November 26, 2022 by MarcDeSoto

[Doug&Deb]

It may restrict movement. They’re meant to fit one way.