moparfun Posted June 3, 2022 Report Posted June 3, 2022 I need help figuring out what parts I'm missing to mount the ignition switch in the dash. I've tried looking for an exploded view to figure what I'm missing but have had no luck. Here are some pics of what I do have. The third pic is of some parts that were under the seat, may be junk or the parts I need? 1954 Plaza wagon (P-25) THANKS Quote
Bryan Posted June 4, 2022 Report Posted June 4, 2022 I would think the switch part is enough, look for the slot to match the dash hole. The flat piece definitely does not go on the curved dash. Quote
moparfun Posted June 4, 2022 Author Report Posted June 4, 2022 Is there suppose to be a tab on the back side of the dash that the switch is fastened too ? The back side of my dash has the same profile as the front side in other words, no tab. I thought the bezel might be two parts, the part the switch fastens too and the chrome part (bezel) that you see on the dash face. Bryan, thanks for the picture Quote
Bryan Posted June 4, 2022 Report Posted June 4, 2022 Don't know, but there would be a small bracket with a screw hole, and a matching place on the side of the switch if there was. Some locks just have a very short section of threaded part on them, that you stick out of the dash front and screw a ring onto them. Doesn't take much to hold them. The main force on them is a twisting motion when you're turning the key. Quote
moparfun Posted June 4, 2022 Author Report Posted June 4, 2022 My ignition switch is like yours in that there are no threads on it. Thats why I think I got some parts missing Quote
dpollo Posted June 11, 2022 Report Posted June 11, 2022 You are missing the collar and chrome ring that the switch slides into and is secured by a single screw accessed from below. Quote
moparfun Posted June 11, 2022 Author Report Posted June 11, 2022 Thank You, now I know what to ask for. It's like a lot of items on this project, things were taken apart about 20 yrs ago and I'm having to piece them back together. For example the brake system , the master cylinder and all that is attached to it was removed so I had to piece it all back together, it's back on it's wheels and the brake system is done, now on to the electrical system. Oh yea here's a pic of the wagon 4 Quote
Marcel Backs Posted June 14, 2022 Report Posted June 14, 2022 Nomads have some very stiff competition in the styling department! I like your wagon much better. Quote
moparfun Posted June 20, 2022 Author Report Posted June 20, 2022 Look what came in the mail today, the black piece is just holding it in place for the pic 1 Quote
RobertKB Posted June 20, 2022 Report Posted June 20, 2022 dpollo beat me to the right answer. The above picture is exactly right. Have fun with the project! Quote
moparfun Posted June 20, 2022 Author Report Posted June 20, 2022 Thank you all, I think the fun is in the hunt Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.