squirebill Posted September 18, 2021 Report Share Posted September 18, 2021 I need a source for the wiper linkage bushings that attach the wiper links to the pivot bar on the vacuum wiper motor. My manual gives me code number23-67-89 which then calls out part number 1239 371. Any help would be appreciated. If unavailable, any ideas how to fabricate a replacement part would also be helpful. Quote Link to comment Share on other sites More sharing options...
Tooljunkie Posted September 18, 2021 Report Share Posted September 18, 2021 I used little grommets. Had to modify somehow.think i widened the groove in grommet. Dont lose the little clips. Quote Link to comment Share on other sites More sharing options...
9 foot box Posted September 19, 2021 Report Share Posted September 19, 2021 I used 51A-17562 grommets. If your wiper motor has hex brass connections, make sure that they are free to rotate. 1 Quote Link to comment Share on other sites More sharing options...
squirebill Posted September 19, 2021 Author Report Share Posted September 19, 2021 Thank you Gents....ordered a 180 piece grommet kit that includes 25 grommets the size of the 51A-17562 grommet. Regards. 1 Quote Link to comment Share on other sites More sharing options...
squirebill Posted October 4, 2021 Author Report Share Posted October 4, 2021 As per your suggestions, I received the box of rubber grommets I ordered about a week ago. Installed them with a little silicone spray for lubricant. All went well and wipers now function. Ordered wiper arms and blades from Rockauto. All is good . Again, thanks for your suggestions. Regards 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.