Switches

[Frank Gooz]

I need some advise I have a 1950 Dodge Coronet. I am having tail light issues. I think I need a headlight switch. I can not seem to find one yet. and would like to know what some of you do for replacements. I have spent many hours on the internet and can get close. Most all are still 12 volt. some will pull instead of turn . some have a fuse.

I thank all of you for your help.

 

 

[Doug&Deb]

Try Bernbaums or Roberts Motor Parts. Also Ed Speigel in Murrysville PA although I don’t remember the number.

[1949 Wraith]

I'm not sure about the switches from the 50's but ones from the 30-40's are usually quite robust. I usually dismantle and clean and lube my vintage switches.

If you think yours is acting up and are going to replace it, why not try refurbishing it first?

[Andydodge]

As far as I know the headlight switcheis not voltage sensitive........I've used an original 1940 Dodge one running 12 volts since 1973 without an issue.......the plastic knob fell apart so I found a screw on metal one & rechromed .............works fine, thats it on the right .....andyd

[desoto1939]

OK this might help you here is the MOPAr part number 1339691 50 Dodge

Chry same number 1951-52

Ply 1950-52 same number

 

I did a search on plymouth headlight switch with the original part number and found several.

 

So go out and seach this is a rotary light switch.

 

I was able to get this part number becasue I have been collecting catalogs over the years and have a tristate parts manaul that was used by the parts suppliers.

 

Rich Hartung

Desoto1939@aol.com