46DeSoto Posted May 30, 2020 Report Posted May 30, 2020 Like many older vehicles, my DeSoto suffers from some unsightly modifications and repairs that I'd like to sort out. My '46 has the dual Comfort Master system. Can anyone provide a photo of the engine bay to show me what proper hose routing looks like? I've got a few tees/loops/long runs of tube that just don't look right to me. Thanks! Austin Quote
DonaldSmith Posted May 30, 2020 Report Posted May 30, 2020 Photo of my DeSoto cowl, with the dual heater: 1 Quote
46DeSoto Posted May 30, 2020 Author Report Posted May 30, 2020 Thank you Donald, that's helpful! I ordered a shop manual but it hasn't arrived yet and I'm impatient. My DeSoto has a Y or splitter threaded into the heater port in the head feeding 2 hoses, I'll try to get a picture of the plumbing. Quote
Dodgeb4ya Posted May 30, 2020 Report Posted May 30, 2020 Some possible extra good info... Be careful with that "Y" control valve. Tough to find anywhere and no rebuild parts are available. Early "Y" valves are cast iron but the more common later ones are aluminum and can break off at the head. The picture Donald shows is most likely correct as early cars like your 1946 use more metal tubing than late 1947 on to 48 which use more of the rubber hoses. The routing looks kinda messy compared to the steel tubing set up. 1 Quote
46DeSoto Posted May 31, 2020 Author Report Posted May 31, 2020 In comparison my hose routing is the same as yours Donald, although not as neat. I do have one connection on my firewall without a hose attached - In your photo, there is a red hose connected just to the left of the head that runs behind the air cleaner. What is this hose for and what does it connect to on the other end? Quote
DonaldSmith Posted May 31, 2020 Report Posted May 31, 2020 The hose running behind the air cleaner is the drain hose for the plenum. (The plenum is the big sheet metal box under the cowl vent, that lets water get on the radio, if the drain is plugged. . 1 Quote
Sniper Posted May 31, 2020 Report Posted May 31, 2020 On 5/30/2020 at 1:39 PM, Dodgeb4ya said: Some possible extra good info... Be careful with that "Y" control valve. Tough to find anywhere and no rebuild parts are available. Early "Y" valves are cast iron but the more common later ones are aluminum and can break off at the head. The picture Donald shows is most likely correct as early cars like your 1946 use more metal tubing than late 1947 on to 48 which use more of the rubber hoses. The routing looks kinda messy compared to the steel tubing set up. Looks like this will work Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.