RobWood Posted October 20, 2019 Report Posted October 20, 2019 How do I make sure my linkage and all is adjusted properly. Also how do I adjust the clutch? Quote
Jj1981 Posted October 21, 2019 Report Posted October 21, 2019 When I first attempted to drive my b2b it would not engage 1st gear I found the rubber bushing that went onto the shift rod that connects to the transmission was missing and the rod could not engage so I built a bushing and it shifts like a dream Quote
RobWood Posted October 21, 2019 Author Report Posted October 21, 2019 Mine shifts nice just a little sloppyish but i started getting a little grinding lately when i put it in gear and shift Quote
Los_Control Posted October 21, 2019 Report Posted October 21, 2019 13 minutes ago, RobWood said: Mine shifts nice just a little sloppyish but i started getting a little grinding lately when i put it in gear and shift I suspect this is a area you will want to explore and try to get the existing in as good shape as you can. Rather you think so or not, the shift linkage is a very important area, you want to be sure you have it as lubricated and working as you can. Otherwise, just take it apart and grease it, then assume it all works. Quote
JBNeal Posted October 25, 2019 Report Posted October 25, 2019 additional information - Column Shifter Adjustments Quote
RobWood Posted April 1, 2020 Author Report Posted April 1, 2020 On 10/24/2019 at 7:04 PM, JBNeal said: additional information - Column Shifter Adjustments Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.