Ranger Posted April 21, 2019 Report Posted April 21, 2019 (edited) I plan to put newer wheels on a 1936 Plymouth. Do the rivets need to be ground flush as in this picture for the wheels to set flat and run true? Edited April 21, 2019 by Ranger Quote
Plymouthy Adams Posted April 21, 2019 Report Posted April 21, 2019 most all wheels including the modern allow wheels have equally spaced indents between the mounting holes to accommodate such rivets.... Quote
Ranger Posted April 21, 2019 Author Report Posted April 21, 2019 Thanks Plymouth, knew you’d be on that. I’ve got a little vibration I’m trying to locate. Guess I’ll look to Ujoints next. Quote
Los_Control Posted April 21, 2019 Report Posted April 21, 2019 Oooh I could tell stories about U-joints .... not only do they wear out and get loose, grease dries out and they get tight. Really need to pull the drive line to inspect properly. I bet they would love to be disassembled and givin some love, good cleaning and fresh grease ... cant hurt a thing. My off topic chevy is acting like it may have a u-joint going bad, I need to do the same, just to eliminate them from the picture. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.