Adventuredude Posted March 28, 2019 Report Posted March 28, 2019 Just pulled the 6 out of the newly purchased 1954 Plymouth Savoy and replaced the main seal. The car is now difficult to start and when finally runs it sputters doesnt rev up exc then dies .What could be wrong typically after pulling the motor and putting it back in Quote
kencombs Posted March 28, 2019 Report Posted March 28, 2019 I'd look first at timing and distributor cap. Real easy to bump and move the first and crack the second while installing an engine. DAMHIKT Next would be look for unconnected vacuum lines. Then check fuel delivery, line sucking air at the pump? Quote
belvedere Posted March 29, 2019 Report Posted March 29, 2019 I’m thinking along the same lines as Ken. Hard starting and won’t rev could sure be timing and/or weak spark. Quote
Dan Hiebert Posted March 29, 2019 Report Posted March 29, 2019 Ditto above, with addition to ensure good grounds for electrical. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.