Mark D Posted July 30, 2018 Report Share Posted July 30, 2018 Helping out a friend in Finland whose got a p15 that he imported this past summer. He’s trying to find a rear axle that has a gear set for better highway speeds. Gave him photos out of one of the p15 parts catalogs I have for the ratios that were offered from p14-p24. He’s found an a guy nearby that has an axle but it has numbers that don’t correspond to what I sent him. Supposedly this axle came out of a 1950 dodge convertible but we don’t know if it original to the car. Also in a past conversation with One of you gurus there was mention that there was a way to tell what gear set was installed in the pinion from markings on the case? Still working on my first coffee of the morning, So I may still be a little under caffeinated. Appreciate guidance here. Quote Link to comment Share on other sites More sharing options...
Young Ed Posted July 30, 2018 Report Share Posted July 30, 2018 The ratio should be stamped in a flat along the edge of the diff case. Quote Link to comment Share on other sites More sharing options...
Plymouthy Adams Posted July 30, 2018 Report Share Posted July 30, 2018 can often find this number repeated on the hog head near the fill hole.....note that it can be expressed 4.1 or gear numbers say 41:10 were you divide the larger number by the smaller for the ratio Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.