C.C. Rider Posted June 6, 2018 Report Posted June 6, 2018 looking for a alignment tool for a b1d-126 10" clutch assembly. in the book i have it says its tool number G-Tool C-360. Thanks Quote
DJ194950 Posted June 6, 2018 Report Posted June 6, 2018 (edited) 2 hours ago, C.C. Rider said: looking for a alignment tool for a b1d-126 10" clutch assembly. in the book i have it says its tool number G-Tool C-360. Thanks Maybe one of these from oldmoparts.com. Cars maybe too small, not sure -call? Or try a call,search of : https://www.vintagepowerwagons.com/ See attached screen shot of oldmarparts web page. DJ Edited June 6, 2018 by DJ194950 Add vpw mention. Quote
desoto1939 Posted June 6, 2018 Report Posted June 6, 2018 If you can get a 1 inch with ten splies plastic clutch tool at a napa store then this will align the clutch place becasue you have a 1 inch hole with 10 splines on the clutch plate. Rich Hartung desoto1939 I have this toolc360, but the plastic tool will work just fine. Quote
Don Coatney Posted June 7, 2018 Report Posted June 7, 2018 Rich, I believe the pilot bushing is 3/4" not one inch. 1 Quote
desoto1939 Posted June 8, 2018 Report Posted June 8, 2018 Hey Don you might be right about the pilot bushing diameter. The numbers that I gave him was for the splines onthe clutch plate hole and splines. Rich hartung Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.