Fernando Mendes Posted December 27, 2017 Report Posted December 27, 2017 Now on december,20th I tried to start my 251 engine and it won't start.The fuel pump was pouring enough gasoline in the floor.After 7 months running all ok with my PU,fuel pump all ok,since march when I disassembled it,did new FIVE paper gaskets for it.March to May assembling and road testing.After tests I did,it was now ok(may to December,20th).Today December,27th it started very ok,not leaking more at the fuel pump.What could it happens?Only suggestions.Regards. Quote
mechresto Posted December 27, 2017 Report Posted December 27, 2017 Fernando....when you rebuilt your pump, did you use a newly manufactured diaphragm? Or was it new old stock? the older diaphragms cannot handle the increa sing amounts of alcohol present in modern fuels. Quote
Fernando Mendes Posted December 27, 2017 Author Report Posted December 27, 2017 5 hours ago, mechresto said: Fernando....when you rebuilt your pump, did you use a newly manufactured diaphragm? Or was it new old stock? the older diaphragms cannot handle the increa sing amounts of alcohol present in modern fuels. It is NOS.After the new year I will disassemble it to check if was the NOS diaphragm torn.Thanks. Quote
Fernando Mendes Posted December 28, 2017 Author Report Posted December 28, 2017 mechresto good morning.I think my diaphragm is ok,because today I noticed the garage floor where it slept all the night was clear.I functioned the engine and noticed during and after there is no leak on the floor.I will continue observing.Thanks. Quote
mechresto Posted December 28, 2017 Report Posted December 28, 2017 Also make sure that the external leak hasn't turned into an internal one....filling your crankcase with fuel.... 1 Quote
Fernando Mendes Posted December 29, 2017 Author Report Posted December 29, 2017 9 hours ago, mechresto said: Also make sure that the external leak hasn't turned into an internal one....filling your crankcase with fuel.... Ok, I will observe watching the color of the oil or its level in the dipstick.Thanks for your input. Quote
Fernando Mendes Posted December 29, 2017 Author Report Posted December 29, 2017 32 minutes ago, Fernando Mendes said: Ok, I will observe watching the color of the oil or its level in the dipstick.Thanks for your input. You are right.The dipstick is with its level increased and the color of the oil is grey.The smell is different too.Thanks. Quote
Fernando Mendes Posted December 29, 2017 Author Report Posted December 29, 2017 11 hours ago, Fernando Mendes said: Ok, I will observe watching the color of the oil or its level in the dipstick.Thanks for your input. Hi mechresto.I have another NOS diaphragm,but if I put will happen the same.What is the solution to my situation? If I buy a new fuel pump it will solve the problem?Thanks.Regards. Quote
Merle Coggins Posted December 29, 2017 Report Posted December 29, 2017 Maybe you need to get the proper parts for your pump from Then and Now Automotive. http://www.then-now-auto.com/fuel-pumps/ They can even help you identify the pump to be sure you get the right parts. I suspect that the NOS diaphragms that you have aren’t correct if you need to stack 5 gaskets to get it to work. Quote
Fernando Mendes Posted December 29, 2017 Author Report Posted December 29, 2017 2 hours ago, Merle Coggins said: Maybe you need to get the proper parts for your pump from Then and Now Automotive. http://www.then-now-auto.com/fuel-pumps/ They can even help you identify the pump to be sure you get the right parts. I suspect that the NOS diaphragms that you have aren’t correct if you need to stack 5 gaskets to get it to work. Thanks Merle.I already sent a message to THEN & NOW. Quote
Fernando Mendes Posted December 29, 2017 Author Report Posted December 29, 2017 Hi Merle.The last compatible with my fuel pump(diaphragm 6 holes) and block gasket(with disaligned holes) is that CK-102 that I saw in Then & Now.Its diaphragm is the same as mine(NOS). Quote
Fernando Mendes Posted January 4, 2018 Author Report Posted January 4, 2018 On 27/12/2017 at 12:21 PM, mechresto said: Fernando....when you rebuilt your pump, did you use a newly manufactured diaphragm? Or was it new old stock? the older diaphragms cannot handle the increa sing amounts of alcohol present in modern fuels. On 29/12/2017 at 2:57 PM, Fernando Mendes said: Hi Merle.The last compatible with my fuel pump(diaphragm 6 holes) and block gasket(with disaligned holes) is that CK-102 that I saw in Then & Now.Its diaphragm is the same as mine(NOS). Where can I buy a newly manufactured diaphragm? Quote
Blue Posted January 4, 2018 Report Posted January 4, 2018 Good looking truck! I like the wheel color. Do you see many old dodges in Brazil? 1 Quote
Merle Coggins Posted January 5, 2018 Report Posted January 5, 2018 6 hours ago, Fernando Mendes said: Where can I buy a newly manufactured diaphragm? http://www.then-now-auto.com/fuel-pumps/ as stated earlier. Assuming, of course, that they can ship to Brazil Quote
Fernando Mendes Posted January 5, 2018 Author Report Posted January 5, 2018 10 hours ago, BlueberryDodge said: Good looking truck! I like the wheel color. Do you see many old dodges in Brazil? Thanks for your input.I never see many DPCD here. 1 Quote
Fernando Mendes Posted January 5, 2018 Author Report Posted January 5, 2018 9 hours ago, Merle Coggins said: http://www.then-now-auto.com/fuel-pumps/ as stated earlier. Assuming, of course, that they can ship to Brazil Yes,I already contact them but no response yet. Quote
Fernando Mendes Posted January 5, 2018 Author Report Posted January 5, 2018 13 hours ago, Merle Coggins said: http://www.then-now-auto.com/fuel-pumps/ as stated earlier. Assuming, of course, that they can ship to Brazil Hi Merle.Now I disassembled the fuel pump,because I noticed the oil level is increased and its color is different(grey).I had a surprise because there is not torn diaphragm nor torn five paper gaskets.Now I will see why it is spilling gasoline inside the crankcase. Quote
Fernando Mendes Posted January 5, 2018 Author Report Posted January 5, 2018 2 minutes ago, Fernando Mendes said: Hi Merle.Now I disassembled the fuel pump,because I noticed the oil level is increased and its color is different(grey).I had a surprise because there is not torn diaphragm nor torn five paper gaskets.Now I will see why it is spilling gasoline inside the crankcase. Quote
ggdad1951 Posted January 5, 2018 Report Posted January 5, 2018 I had a diaphragm tear, yet I never did actually SEE the tear. It was there because it was dumping fuel on the ground and into my oil. I'd agree that you should not need so many gaskets to make your pump work. Quote
Fernando Mendes Posted January 5, 2018 Author Report Posted January 5, 2018 12 minutes ago, ggdad1951 said: I had a diaphragm tear, yet I never did actually SEE the tear. It was there because it was dumping fuel on the ground and into my oil. I'd agree that you should not need so many gaskets to make your pump work. Ok,Thanks to your input.When my fuel pump did not have these 5 paper gaskets,before may 2017, it did not work well,specially when my engine was climbing the road.I did many tests. Quote
Fernando Mendes Posted January 5, 2018 Author Report Posted January 5, 2018 2 hours ago, Fernando Mendes said: Ok,Thanks to your input.When my fuel pump did not have these 5 paper gaskets,before may 2017, it did not work well,specially when my engine was climbing the road.I did many tests. I changed the diaphragm.It can be porous.It has two faces of rubber.I think this other I changed is very strong.It has an another material between the two faces of rubber,like a tire. Quote
bach4660 Posted January 6, 2018 Report Posted January 6, 2018 the new one looks taller with one more loop of spring (or maybe same height with a tighter wind to the spring), might give stronger pump? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.