Bryan Posted November 23, 2017 Report Posted November 23, 2017 I have a new shop manual for my D24, and a laminated wiring diagram from ClassicCarWiring. Neither indicate the wiring gauges. And from pics under the dash the color codes don't seem correct (pic doesn't show a blue wire to ignition switch). I'm planning (one of these months) to rewire under the hood and to the headlights, with splices to the wires coming from inside at point out of the firewall. Does anybody have a full diagram showing wire gauges, at least for under the hood? Not many solid colored wires as in chart. Supposedly blue, brown yellow & red solid colors.. Quote
dpollo Posted November 23, 2017 Report Posted November 23, 2017 Looks like 10, 12, 14 and 16. and what you have there is in relatively good shape so rather than rewire, tidy up the frayed spots with a bit of shrink tubing. Quote
Plymouthy Adams Posted November 23, 2017 Report Posted November 23, 2017 while not the D24 they are so much the same in wiring for gauge and color....try this if you will...a 49 Plymouth...just go by component and you should be ok 1 Quote
desoto1939 Posted November 24, 2017 Report Posted November 24, 2017 If you look at some of the wires they will be colored and then you will see a stricker mark in the cloth. The stricker mark which is black represents a guage of wire being used. If my memory is correct a single sticker represents 16g, 2 stirckers equal 14g and 3 strikes equal 12 g. But the recomendation is to increase up to 14 g as the minimum and do away with the 16g wire. Rich Hartung desoto1939@aol.com 1 Quote
Bryan Posted November 24, 2017 Author Report Posted November 24, 2017 2 hours ago, dpollo said: Looks like 10, 12, 14 and 16. and what you have there is in relatively good shape so rather than rewire, tidy up the frayed spots with a bit of shrink tubing. Under the hood most of the wire is dry rotted and about 1/2 insulation is gone. Plan was to splice (solder and heat shrink) where some of the wires come into the hood area if needed. And fully replace between voltage regulator, solenoid, etc under the hood. Quote
Bryan Posted November 24, 2017 Author Report Posted November 24, 2017 So if I order any individual wires from a place like Rhode Island Wiring..the "strickers" are not black or white tracing..solid red cloth covered wire will have the white strickers, solid yellow wires will have black strickers..etc? A lot to learn. Quote
dpollo Posted November 24, 2017 Report Posted November 24, 2017 anything I have ordered from Rhode Island has been colour coded the same as the original and of excellent quality. Quote
desoto1939 Posted November 24, 2017 Report Posted November 24, 2017 Yes there are different main colors of cloth covered wires with different color stickers. So If you contact them they might have a set or wires already madeup for you and they are pretty deadon witht he correct wiring color and strickers. Or you can make your own color combination. If your car is going for point judging then the correct color combination is important. Rich Hartung Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.