ptwothree Posted May 30, 2017 Report Posted May 30, 2017 Well after a bunch of surgeries and a few other things, I have finally rounded up enough parts and have the time to put the little beastie back together. I'm in the middle of replacing the brake and fuel lines and I don't remember if the rear flex hose that connects to the 'T' on the axle housing gets a copper washer or not. Can anyone help? It's a '52 cranbrook... Quote
TodFitch Posted May 30, 2017 Report Posted May 30, 2017 I don't see a copper washer/gasket for that location in the '36-'48 parts book nor do I see any specific wording in the '46-'54 factory service manual, so I am guessing not. You should probably look in a '52 specific set of parts and service books to be sure though. Quote
Dodgeb4ya Posted May 31, 2017 Report Posted May 31, 2017 None needed.... it's an inverted flare to junction T-block on axle housing................. Quote
ptwothree Posted May 31, 2017 Author Report Posted May 31, 2017 Good! That's what I needed to know. Thank you both. Little things like this are what make this forum the wonderful entity it is! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.