Dodgeb4ya Posted June 9, 2016 Report Posted June 9, 2016 Can anyone ID this odd truck 3 speed? Looks to be Dodge truck. It is a New Process # C88461-cast on top cover. It also has an odd four bolt PTO cover and appears to use a Fluid Drive input shaft? Quote
Jeff Balazs Posted June 9, 2016 Report Posted June 9, 2016 Sorry no real help with the iD on this. Maybe something from a special order civilian Powerwagon? Am curious though about the diameter of that spline section on the input. Jeff Quote
Dodgeb4ya Posted June 9, 2016 Author Report Posted June 9, 2016 I will measure that input shaft... I think it's a 1-1/4". Quote
Phil363 Posted June 9, 2016 Report Posted June 9, 2016 (edited) New Process 3 Speed column shift transmissions were in the Dodge B-2, B-3- B-4 series 1/2 ton thru 1 ton vehicles according to my shop manual. The top of my transmission has the same number (C88461) on top as yours. However, the body of the transmission is different. In my shop manual all the transmissions that have that power take-off plate on the bottom of the transmission are either a 4-speed or 5-speed transmission. They are all also shown as being floor shifted. Phil Edited June 9, 2016 by Phil363 Quote
Merle Coggins Posted June 9, 2016 Report Posted June 9, 2016 Probably for a B2 or B3 truck with FD. I wasn't aware that PTO's were available on the 3 speeds. Quote
Dodgeb4ya Posted June 9, 2016 Author Report Posted June 9, 2016 The 4 bolt PTO cover is whats confusing. I have a couple regular 1/2-1 ton 3 speeds. None have the odd 4 bolt PTO. Maybe it's for the small DU route van? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.