stan's52 Posted September 7, 2015 Report Posted September 7, 2015 How is the horn button removed in my 52 Concord? Thanks for any help. Stan Quote
BobT-47P15 Posted September 7, 2015 Report Posted September 7, 2015 I think there may be a couple screws that you will see on the back side of the steering wheel center. If so, they will be inset into a "tunnel", and probably will be Phillips head screws......... Otherwise, if that is not the case, then you probably press down and turn the horn center. Just guessing here............. (My 47 Plym has the screws on the back side of the wheel) You might want to invest in a Repair/Service manual and a Parts manual for your car............there is much useful information in those. Can be found on eBay. Quote
Young Ed Posted September 7, 2015 Report Posted September 7, 2015 Concord being the cheapy lineup I believe should have screws from the backside. Quote
Plymouthy Adams Posted September 7, 2015 Report Posted September 7, 2015 you cheapy 51/52 Plymouth (all to my knowledge) uses retainer screw from the rear...53 Plymouth saw the twist off caps.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.