linus6948 Posted July 6, 2014 Report Share Posted July 6, 2014 (edited) I finally got around to bring my D24 to life again, my entire fuel system had gone to hell and the brakes were all locked up,frozen and leaking. I used my motorcycle lift to raise the tank into position Edited July 7, 2014 by linus6948 Quote Link to comment Share on other sites More sharing options...
casper50 Posted July 6, 2014 Report Share Posted July 6, 2014 I've never said this about a fuel tank before but, that's a beauty. Very nice. 1 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 6, 2014 Author Report Share Posted July 6, 2014 (edited) Carb needed a rebuild and I had to replace the fuel pump and clear out all the fuel lines. My Wife wasn`t thrilled about this, but I pointed out it was better than the Dining room table. Edited July 7, 2014 by linus6948 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 6, 2014 Author Report Share Posted July 6, 2014 (edited) Got it on the lift to start the brakes, this is the first time I got my antique car onto my antique 2 post lift. It is a 1970 Benwil originally from a Chevrolet Dealership, I got it after it sat in a field for years and was totally "roached" and on it`s way to be scrapped. Edited July 7, 2014 by linus6948 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 6, 2014 Author Report Share Posted July 6, 2014 I had tried for 3 days to restore the original tank but it was hopeless, I stunk like gas varnish the entire time, went thru 3 gallons of lacquer thinners, then bought a new tank from Tanks Inc. but funny thing I found it cheaper on ebay than on their own website, I paid $264.99 for a new tank, sender and straps delivered. $30 cheaper than from the manufacturer, I had it in 3days drop shipped by Tanks Inc.I don`t know if I am allowed to post the ebay link so if anyone needs it message me. Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 6, 2014 Author Report Share Posted July 6, 2014 My Dashboard 1 Quote Link to comment Share on other sites More sharing options...
DonaldSmith Posted July 6, 2014 Report Share Posted July 6, 2014 Oh, Oh! Don Coatney is going to give you two demerits for fuzzy dice. Oh, well, to each his own; i guess that's what this forum is all about. In matters of taste, there is no dispute. Or is it: In matters of dispute there is no taste. 2 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 6, 2014 Author Report Share Posted July 6, 2014 (edited) I`m sorry my apologies but I`am a "Child of American Graffiti" in fact that skull is the same one that hung in "Bob Falfa`s Black 55 Chevy" in the movie. Below is a shot from a long time ago with the 41 Chevy Coupe I had back then, same skull hung in that car. Edited July 7, 2014 by linus6948 2 Quote Link to comment Share on other sites More sharing options...
Lumpy Posted July 6, 2014 Report Share Posted July 6, 2014 Oh no! How did the old girl fall into such disrepair? Lumpy is a '48 D24, but it's the 2-door sedan. That's a nice looking coupe. Sometimes I wish Lumpy was a coupe, other times...not. !!! I see yours has the clock. Mine has the clock "blank". ken. Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 6, 2014 Author Report Share Posted July 6, 2014 (edited) Thanks Ken, I got the car in 87 used it for fun till 99, then it sat till 11 then I put ethanol fuel in it and it ran for 2 months and one hot August day liquid tar passed thru my whole fuel system. Disgusted I pushed it in the garage for another 3yrs and now I have the time and the inclination to do some things long overdue. It now runs better than it ever did and I`m on my way to actually having working brakes. The new tank is full of ethanol-free 93 octane gasoline, I drove 37 miles each way to get it at "Harry`s Gas" it was like the "speakeasy's" of gas stations, the place didn`t even have a sign. Paul Edited July 7, 2014 by linus6948 1 Quote Link to comment Share on other sites More sharing options...
Lumpy Posted July 6, 2014 Report Share Posted July 6, 2014 That's quite a transition from blue flames to wide-whitewalls. !! Glad you are re-inspired, she deserves to get out and be seen. I know what you are talking about, I did an engine swap a long time ago in my '72 Dart, finally got it running perfect only to discover the trans was leaking out the front. So, parked her in the garage for a year or two, or three, then rolled around on the gravel-dirt floor of my garage, one winter, under the Dart, pulled the tranny, put in a new front seal, got her going again and....same leak! It wasn't the front seal, the converter actually had a hole in it. So in utter disgust I put her up on blocks for another five years. Then I put in a new converter spring before last, and she's been tearing up the roads ever since. So...get 'er done! That's a nice car. k. 1 Quote Link to comment Share on other sites More sharing options...
frankieflathead Posted July 7, 2014 Report Share Posted July 7, 2014 My Dashboard Looks like home to me! 1 Quote Link to comment Share on other sites More sharing options...
fstfish66 Posted July 7, 2014 Report Share Posted July 7, 2014 american graffitti guy here my self,,,nice looking 48,,glad u made the switch from that other brand,,,,lift looks pretty good to me,,,so does your garage,,,,may i ask where in pa ??? im out side philly sorry to say on the nj border,,, 2 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 7, 2014 Author Report Share Posted July 7, 2014 Thanks, it took a bit of doing to get that lift back in service but I get quite a bit of use out of it, I`m in White Haven on the Lehigh River off interstate 80. Quote Link to comment Share on other sites More sharing options...
st63 Posted July 7, 2014 Report Share Posted July 7, 2014 Great looking coupe....are those vintage aftermarket backup lights on it, or something you added later? I'm looking to add some to my 41 coupe.... so I'd love to know how those are activated..... 1 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 7, 2014 Author Report Share Posted July 7, 2014 It came with the optional single backup light, also has the heater and a few other of the factory options, here is the link to the options brochure that shows a good image of the backup light and the other available options of the time, I don`t know how the light is hooked up or if mine even works. http://p15-d24.com/files/file/51-mopar-approved-accessories/ 1 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 7, 2014 Author Report Share Posted July 7, 2014 I`m in the middle of a brake overhaul and was amazed at the price for a pressurized brake bleeder so I made one out of what I had on hand, a garden sprayer and an airlock and 5 gallon jug cork both from the local wine/beer making store. It really comes in handy in speeding up the process of bleeding the brakes. Quote Link to comment Share on other sites More sharing options...
st63 Posted July 8, 2014 Report Share Posted July 8, 2014 Now THAT'S an innovative solution....and thanks for the info on the backup light. 1 Quote Link to comment Share on other sites More sharing options...
fstfish66 Posted July 8, 2014 Report Share Posted July 8, 2014 (edited) white haven,,,theres a mopar suspension shop up your way, im sure uve seen plenty of muscle car era cars up that way,,,a mopar club cruise nite in trexlertown,,isnt to far from u ??? im 2 hours south,,, going to chryslers at carlisle this weekend? Edited July 8, 2014 by fstfish66 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 8, 2014 Author Report Share Posted July 8, 2014 I believe trexlertown is about an hour south of me, I hardly ever see any antique or muscle cars in my neck of the woods. Unfortunately no Carlisle for me, two Graduation Parties to attend this weekend. Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 8, 2014 Author Report Share Posted July 8, 2014 (edited) Rebuilt the master cylinder and replaced brake lines where needed. Now drilling and tapping the two cross-threaded bolts that snapped during the front floorboard removal. I will replace all the hardware with stainless steel, most of the original bolts are lousy and I don`t want to put them back in. Edited July 9, 2014 by linus6948 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 9, 2014 Author Report Share Posted July 9, 2014 (edited) My original factory front floor covering was very dry and brittle and really got beat-up when I had to remove it to access floor panel to change the master cylinder. I put it back but it looks bad, and the (horse-hair ?) padding underneath it has for the most part has turned to dust. Does anyone know where I can get replacements/reproductions, mine are mostly black rubber with a camel colored carpet panel incorporated into each side and what can I use for the padding. Also the (felt ?) gasket strips under the metal floor pan are in need of replacement, any suggestions? Paul Edited July 9, 2014 by linus6948 Quote Link to comment Share on other sites More sharing options...
greg g Posted July 9, 2014 Report Share Posted July 9, 2014 felt you can get and cut to fit at any fabric supply store. The horsehair just stuff can be replaces with carpet underlayment, I got some at no cost from a local auto upholstery place. Trim and scraps, but plenty to do the drivers side of my Plymouth coupe (Just replaces the floor section around the gas pedal and MC access) You can also stick down some furnace duct insulation wrap. I had some left from doing the ducts in my garage. I got some Grace brand self adhesive flashing membrane to hold it down. over lap the insulation about an inch and a half. and stick it down. I then glued the carpet stuff to the insulation to the back of what was left of my floor mat. As far as the rubber part, you can get ribbed floor matting from Home improvement place and fiddle with it. 1 Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 11, 2014 Author Report Share Posted July 11, 2014 Great looking coupe....are those vintage aftermarket backup lights on it, or something you added later? I'm looking to add some to my 41 coupe.... so I'd love to know how those are activated..... They are activated by a switch added to the steering column that is pushed in by the reverse linkage Here is the optional backup light before I rubbed it down with wet balled-up aluminum foil to remove the green patina Here it is after a 3 minute rubdown with the wet ball of foil Paul Quote Link to comment Share on other sites More sharing options...
linus6948 Posted July 11, 2014 Author Report Share Posted July 11, 2014 I gave the bumpers the same wadded up wet aluminum-foil "rub-down" and it worked wonders removing rust spots.the green patina and helped to feather-out the chrome where it was flaking. It takes very little labor to make this happen, from what I have read it is a chemical reaction that does most of the work and it does not scratch or dull the chrome like steel wool. Paul Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.