55 Fargo Posted April 9, 2013 Report Posted April 9, 2013 Hey all was watching a 50 Chevy with either a 261 or 235, drag racing, 13 second car at 95 mph, that is impressive. Any ideas what a Mopas flat head 6 might be able to pull on the 1/4. Here is a you tube link, Quote
Alshere59 Posted April 9, 2013 Report Posted April 9, 2013 The link below will give you some times from members that have ran theres on the track. This could be fun if organized. Just have everyone take a run and post a pic of their car on the track and the time slip. Set up some classes and at the end of summer see who has bragging rights. Even some of our members across the ponds may be able to participate. Any thoughts? Good idea bad idea. For the members close to the same track they could meet and run the same day. http://mopar.pairserver.com/p15d24ph_forum/index.php?/topic/27088-quarter-mile-performance-numbers/?hl=%2Bracing+%2Btimes#entry270287 Quote
55 Fargo Posted April 9, 2013 Author Report Posted April 9, 2013 Great idea, still impressed with the 6 cyl chevy, 13.8 is quick... Quote
Alshere59 Posted April 9, 2013 Report Posted April 9, 2013 I added a poll to a forum wide race to see if there is any interest. It is posted in Forum annoucements and feedback. http://mopar.pairserver.com/p15d24ph_forum/index.php?/topic/32785-any-interest-in-a-forum-wide-racing-competition/ Quote
austinsailor Posted April 9, 2013 Report Posted April 9, 2013 Back in the early 60s I'd run my '55 Plymouth 4 door flathead 6 with a powerflite. Seems like my times were between 20 and 21 seconds at about 60 mph. No, not a record setter, but remember what it is! Quote
55 Fargo Posted April 10, 2013 Author Report Posted April 10, 2013 (edited) Back in the early 60s I'd run my '55 Plymouth 4 door flathead 6 with a powerflite. Seems like my times were between 20 and 21 seconds at about 60 mph. No, not a record setter, but remember what it is! Hi, sure you had a blast doing it too. I am quite impressed with the Chebby 6s, and the slant 6 can be made to go too... Edited April 10, 2013 by 55Fargo Quote
BobT-47P15 Posted April 10, 2013 Report Posted April 10, 2013 When I ran the convert at the HAMB drags in 05, my top speed on my best run was like 57 mph......time was 20-something. But, I didn't jam it on takeoff as I didn't want to break anything related to clutch or transmission. Maybe with pushing a bit harder, I could have hit low 60s mph. Surely there's something hopped up that goes faster. I don't think this one is a flathead six though....... Quote
55 Fargo Posted April 10, 2013 Author Report Posted April 10, 2013 (edited) When I ran the convert at the HAMB drags in 05, my top speed on my best run was like 57 mph......time was 20-something. But, I didn't jam it on takeoff as I didn't want to break anything related to clutch or transmission. Maybe with pushing a bit harder, I could have hit low 60s mph. Surely there's something hopped up that goes faster. I don't think this one is a flathead six though....... Hi Bob, as much as I love the Moparf Flathead 6s, they are no match for a hopped up Chevy 6 or the slant 6... Edited April 11, 2013 by 55Fargo Quote
Scruffy49 Posted April 11, 2013 Report Posted April 11, 2013 Mine would probably take a day and a half in the 1/4... I can only push it so fast... on the rare occasions it deigned to run, 50 mph was flogging it for all it was worth. 3 speed and 4.78 rear gears can pull over a house, but they aren't fast at it. Quote
greg g Posted April 13, 2013 Report Posted April 13, 2013 check the videos. http://www.youtube.com/channel/UCLWNVrNIcasPEEzeRp7acvQ 1 Quote
55 Fargo Posted April 13, 2013 Author Report Posted April 13, 2013 check the videos. http://www.youtube.com/channel/UCLWNVrNIcasPEEzeRp7acvQ Very impressive, what was its 1/4 mile speed and time? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.