Heater color

[ggdad1951]

Pretty much all done. Getting the close up was tough, between the powder coat paint build up and the bumpers relaxing it was a SQUEEZE to ge the screw in on the bottom:

fans in:

Supports in:

cores in:

housing all buttoned up:

Edited January 11, 2012 by ggdad1951

[John-T-53]

Nice! Looks like you installed new hardware cloth for the screens too.

Yeah, they are kind of tough to get back together with the rubber blocks in there...and that stainless band is a little too tight fitting when just trying to get the screws started in the speed nut clip.

Did you have the cores tested to see if they hold?

[ggdad1951]

I pulled the screens and repainted them (should have been CAD plated). The Cores were tested as well as the motors rewired w/ new wires.