MarkAubuchon Posted November 2, 2011 Report Posted November 2, 2011 Well time to put the motor in my 1950 Since I didnt take it apart, and the previuos owner threw all of the parts in a box with no lableing. What size nut and bolts hold the mount to the frame? Does the bell housing have a mount a rubber mount as well. Pictures would help. Thanks Mark Quote
Young Ed Posted November 2, 2011 Report Posted November 2, 2011 (edited) The rear does have rubber mounts but you don't have to mess with them to remove the engine/bellhousing. There are 2 bolts on horizontally on each side of the bellhousing. See my cheesy circles. Edited November 2, 2011 by Young Ed Quote
MarkAubuchon Posted November 2, 2011 Author Report Posted November 2, 2011 not able to open your document/picture Quote
Dan Babb Posted November 3, 2011 Report Posted November 3, 2011 I think the bolts on the front cross member are 7/16 fine thread. Check that though...its from memory which sucks. Quote
greg g Posted November 3, 2011 Report Posted November 3, 2011 copy paste this to your browser address box and see what happens. img.photobucket.com/albums/v172/dodgepu1946/my%20dodge/enginemounts.jpg By the way, You didn't call me back. Quote
HanksB3B Posted November 4, 2011 Report Posted November 4, 2011 that will fit through the hole with a length that extends past the tightened nut a minimum of half the diameter of the bolt when everything is tightened. You may want to consider using new stainless steel hardware (bolt, washer, lock washer, nut, and in some cases SS nylock nuts. After cad plating all my original hardware I came to the conclusion that (except where visibly seeing that famous DCPD logo mattered) new and stainless was the way to go. Mark, do you have a Truck Manual and a Parts List Book? It can really help. Hank Quote
MarkAubuchon Posted November 14, 2011 Author Report Posted November 14, 2011 no manual, probably a good idea Quote
HanksB3B Posted November 15, 2011 Report Posted November 15, 2011 Pilot House Index of Know http://dodgepilothouseclub.org/know Hank Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.