48 Dodge D24

[bighammer48]

I have a 48 D24 Sedan. I have determined that the previous owner put a flathead from a 54 Dodge into it. My exhaust manifold is cracked. I have 2 questions:

1.) I have an NOS intake/exhaust manifold combo from a 48 Dodge, will it fit this engine?

2.) I have removed 10 nuts and bolts from the manifolds, and yet they will not budge. Are there more that cannot be easily seen? The origunal D24 shop manual is of no help.

[Niel Hoback]

Bolt number eleven is in the center, underneath where you can't see it. Yes your NOS will fit.

[bighammer48]

Thank you very much:)

[oldmopar]

The new exhause manifold will fit but it exits in a different place a little further back then the 54 so you may have to rework your exhaust engine pipe

[greg g]

I believe there are 13 fasteners for the manifold set up, not including the ones that hold the intake and exhaust together.

[Don Coatney]

Thirteen is correct as pictured.

[faucet47custom]

search the threads and read about how to remove the manifolds without breaking the bolts. I unfortunately didn't do that.

[bighammer48]

Thanks everyone. You have been most helpful, as always.