318/5.2 L Mopar Fuel-Inj. manifold swap ??

[Don Coatney]

 What are you using for horns ??

I have a pair of after market horns tucked in front of the radiator. They don't sound like the originals but they do toot.

 

[Plymouthy Adams]

I want a horn like Porky had on his Hudson...th pigmobile

[littlemo]

I'm trying to finish the modified e-brake set up for the drum brakes on the 8 3/4 rearend of my 48 SD. ( see pics page 10, post #194 ) As you can see, i had intended to use my original e-brake cable. However, no go; this cable is locked up tighter than a ; well, you get the idea!    I'm considering using a Lokar EC-8002U  cut to fit cable as a replacement; has anyone ever used this cable, or can provide me some "feedback" ???    Cass, alias littlemo..

[Plymouthy Adams]

about any later model Mopar cable will work on the earlier unit pullhandle..

Edited December 3, 2018 by Plymouthy Adams

[falconvan]

Good to see you working on the Mopar again! Have you tried a road test yet?

[littlemo]

Re Road Test;  Yeh, went out and walked up and down on it; it's still good !!!     Cass, alias littlemo...Add: Thanks "Plymouthy Adams", and good hearing from ya again falconvan !!!

Edited September 21, 2014 by littlemo

[DJ194950]

Littlemo,

I have used several different Lokar products on several projects and all have been very first class. Just have not used the emergency brake setup, never needed one yet. Used all the time on street rods, many have been shown as a  part of buildup stories, show them being used.  All cut to fit, but not real hard to do. Measure twice, cut---.

 

Not cheap, but quality.

 

DJ

[littlemo]

OLD, SLOW, and Got to GO !!!  ( Please see Classifieds )  

[littlemo]

In 1961 I was driving this ;  1953 Chevy , my very first "Ride" !!!

 

Edited July 4, 2018 by littlemo

[littlemo]

Late in 2010 or early 2011 I removed the front clip from my 48 and now cant find the screws/bolts that I took out ;  any suggestions ???

[littlemo]

Also; How to "Delete" a post ???  ( the 48 is no longer for sale !!)

Edited November 25, 2018 by littlemo

[Dartgame]

Don’t know about deleting a post.

 

for hardware - (using my 52 as a reference so take this with a grain of salt), its all standard threads nothing exotic, mostly 1/4 -20, 5/16 etc. There are many sources for hardware similar to oem, from many restoration houses. Assuming you are after large captive washer bolts etc. Try restoration specialties, Mr. G’s, and believe it or not your local hardware store sells a lot of SAE type hardware too, at least mine does.

[Plymouthy Adams]

On ‎11‎/‎25‎/‎2018 at 3:49 PM, littlemo said:

Also; How to "Delete" a post ???  ( the 48 is no longer for sale !!)

hard to delete a post title,  easy to delete your entry however as it is but an edit operation...