Jump to content

smallblockjunkie

Members
 View Profile  See their activity

  • Posts

    209

  • Joined

  • Last visited

 Content Type 

Everything posted by smallblockjunkie

  1. smallblockjunkie
    what is later this month? I live in Henderson which is 20 minutes from vegas.
  2. smallblockjunkie
    They need to get rid of the punt returner. He cost them the game by giving the giants 10 points Same as the # on his jersey
  3. smallblockjunkie
    I like the color, looks like it is going to be a nice truck when it is done
  4. smallblockjunkie
    send me your zip code then I will pm you with the info on shipping next week
  5. smallblockjunkie
    drivers side or pass side for the drum
  6. smallblockjunkie
    I have both but the shipping would be $$$$$
  7. smallblockjunkie
    is this for a half ton or a bigger truck because this is what was in my half ton
  8. smallblockjunkie
    a few more
  9. smallblockjunkie
    the truck is almost there Just have to paint the tailgate and all the paint will be done
  10. smallblockjunkie
    I sent my bumper to Ogden chrome in Ut. they had ups pick it up they strighted it, triple chromed it and returned it to me in about 10 days
  11. smallblockjunkie
    ?on the hood hooks, you have two that have tighter bends then the other two, which ones go to the front of the hood ?
  12. smallblockjunkie
    48 to 50 are the same the 47 are the old body style.
  13. smallblockjunkie
    the 86 corvette susp will fit in there like a glove. with a littlt work the ls1 will go in nice also.
  14. smallblockjunkie
    When I took my cab off it was empty inside and i used a 8 ft long 4x4 and my cherry picker.
  15. smallblockjunkie
    you can glue one in or you can just get rid of the whole vent
  16. smallblockjunkie
    It is 1986 corvette susp all the way around the truck. You would not belive how easy the front end went in. After boxing the stock frame rails there was only 1/16 inch gap on each side and the overall width is the same as the old front axel.
  17. smallblockjunkie
    I say build it the way that you want. You are going to be driving it. This is mine, I went with the hotrod truck
  18. smallblockjunkie
    this is what my four speed looks like as far as ebrakes
  19. smallblockjunkie
    Are you giong to leave the fuel tank in the cab or fill the fuel tube hole ?
  20. smallblockjunkie
    had some health problems not much done to the truck. will start again soon.
  21. smallblockjunkie
    this is about 40 hours of sanding and buffing time. Do it just like buds truck said and spend the time and it will look good at the end of the project
  22. smallblockjunkie
    Two out of the master and three out of the proportioning valve
  23. smallblockjunkie
    I put the susp. from a 86 c4 corvette under mine. the front is a weld in deal not much to it but the rear is a little more involved. had to be narrower and new half shafts made.
  24. smallblockjunkie
    good job on the header find. sounds like you are moving along.
  25. smallblockjunkie
    It got down to 27 degrees over night
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Terms of Use