1950 Plymouth Deluxe P-20 front end assembly

[Surge]

Hello all!  now that i have the clutch issue behind me for now, i am assembling the last few parts on the front end of my car.  it has been so long since I took it apart, i am not recalling where the attached piece is supposed to go.  any guidance?

[andyd]

I've not played with a 1950 Plymouth but that piece looks like a fender brace that goes from the frame to the lower edge of the front fender behind the wheel arch.......but I could be wrong.......andyd 

[Surge]

Hi andyd,

 

Yes that piece is quite similar to fender brace; i do have those which will probably not be reinstalled.  this piece is still a mystery to me but i'm trying to scour any pic i can to get a glimpse of possible location.

[Bob Riding]

Dash to firewall brace?

[Plymouthy Adams]

I would suspect it to b the back brace that attaches to the spalsh pan at the bottom and the back of the hood latch plate at the rear...

[Surge]

Yes Plymouth Adams.  I starting assembling the grille area today hoping the location would reveal itself...got it!

[andyd]

I've learnt something ...........always good when that happens..............andyd