Carburetor bushing

[Doug&Deb]

I have a 52 Coronet with a Stromberg BXVES carb. There is a brass bushing on the air horn that the dash pot piston goes through. Mine keeps coming loose and I’m wondering what I can use to get it to stick in its place. It’s a press fit that’s not tight enough anymore. I’ve tried using fuel resistant permatex but it’s not holding. Just a nagging little problem I’d like to fix. It doesn’t seem to affect the drivability at all.

[Dave72dt]

Locktite sleeve retainer maybe?

[squirebill]

Three center punch marks on the OD of the bushing  about 120* apart  might give it more of an "interference" fit.