Doug&Deb Posted September 6, 2023 Report Share Posted September 6, 2023 I have a 52 Coronet with a Stromberg BXVES carb. There is a brass bushing on the air horn that the dash pot piston goes through. Mine keeps coming loose and I’m wondering what I can use to get it to stick in its place. It’s a press fit that’s not tight enough anymore. I’ve tried using fuel resistant permatex but it’s not holding. Just a nagging little problem I’d like to fix. It doesn’t seem to affect the drivability at all. Quote Link to comment Share on other sites More sharing options...
Dave72dt Posted September 7, 2023 Report Share Posted September 7, 2023 Locktite sleeve retainer maybe? Quote Link to comment Share on other sites More sharing options...
squirebill Posted September 7, 2023 Report Share Posted September 7, 2023 Three center punch marks on the OD of the bushing about 120* apart might give it more of an "interference" fit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.