Wiring harness 38 Plymouth business Coupe

[TimMuldoon]

Looking for a wiring harness but not concourse de elegance. prices seem to be $150 to $1500. something decent but below $500 if possible. 

 

Thanks ! 

Tim 38

[desoto1939]

Check Rhodle Island Wiring they have stock wire harness made and they have great quality workmanship. I have used their services.

 

Rich Hartung

Desoto1939@aol.com

[Kilgore47]

I used a standard six volt wiring harness from Rebel Wire.  Every wire was labeled every six inches with a note telling where the wire went.  Came complete with a fuse block and is set up for turn signals.  Good phone support.  Not original cloth covered wire.  It was less than 400 dollars.  Install was easy.  Just took time to solder all the connections.  This was my first time re wiring a car.

[Sniper]

If you are still running 6v make sure your harness is rated for that.  a generic 12v harness won't cut it, the current is roughly double with a 6v system compared to a 12v system so the wire needs to be a heavier gauge.

 

If you're running a 12v setup now then a generic hot rod harness can be used.  That is what I did when I rewired my 51.  Of course I had to remove the PO's mechanics hack job first.