GoodnightIrene Posted March 25, 2022 Report Posted March 25, 2022 (edited) Plan on cutting new gaskets for my powerflite but haven't a clue as to what thickness of material to go with. My local parts shop only stocks 1/32" material and it seems considerably thicker then the stuff I pulled from the transmission. I would really appreciate any help on the matter. Edited March 25, 2022 by GoodnightIrene Quote
kencombs Posted March 26, 2022 Report Posted March 26, 2022 Take a look at mcmaster.com. They have a 1/32" material, but it comes is fairly big sheets. 1 Quote
Solution Dodgeb4ya Posted March 26, 2022 Solution Report Posted March 26, 2022 Felpro #3011 gasket sheet .015" thk. is what you want... 1 Quote
GoodnightIrene Posted March 27, 2022 Author Report Posted March 27, 2022 8 hours ago, Dodgeb4ya said: Felpro #3011 gasket sheet .015" thk. is what you want... Wonderful, so that would be a 1/64" felpro gasket, found a link: https://www.oreillyauto.com/detail/c/fel-pro/fel-pro-gasket-material/fel0/3045?q=gasket+material+1%2F64&pos=1 Thanks for the help! 1 Quote
GoodnightIrene Posted March 28, 2022 Author Report Posted March 28, 2022 (edited) Got back and cut the gaskets, here is what I'm left with. They seem quiet pliable and hopefully will do the job. It was also a hell of a lot cheaper then buying them pre-cut. Need to pinch every dime. ^^ Edited March 28, 2022 by GoodnightIrene Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.